Table of Contents

• Child Process
  • Class: ChildProcess
    • Event: 'exit'
    • Event: 'close'
    • Event: 'disconnect'
    • Event: 'message'
    • child.stdin
    • child.stdout
    • child.stderr
    • child.pid
    • child.kill([signal])
    • child.send(message, [sendHandle])
    • child.disconnect()
  • child_process.spawn(command, [args], [options])
  • child_process.exec(command, [options], callback)
  • child_process.execFile(file, args, options, callback)
  • child_process.fork(modulePath, [args], [options])

Child Process#

Stability: 3 - Stable

Node provides a tri-directional popen(3) facility through the child_process module.

It is possible to stream data through a child's stdin, stdout, and stderr in a fully non-blocking way.

To create a child process use require('child_process').spawn() or require('child_process').fork(). The semantics of each are slightly different, and explained below.

Class: ChildProcess#

ChildProcess is an EventEmitter.

Child processes always have three streams associated with them. child.stdin, child.stdout, and child.stderr. These may be shared with the stdio streams of the parent process, or they may be separate stream objects which can be piped to and from.

The ChildProcess class is not intended to be used directly. Use the spawn() or fork() methods to create a Child Process instance.

Event: 'exit'#

This event is emitted after the child process ends. If the process terminated normally, code is the final exit code of the process, otherwise null. If the process terminated due to receipt of a signal, signal is the string name of the signal, otherwise null.

Note that the child process stdio streams might still be open.

See waitpid(2).

Event: 'close'#

This event is emitted when the stdio streams of a child process have all terminated. This is distinct from 'exit', since multiple processes might share the same stdio streams.

Event: 'disconnect'#

This event is emitted after using the .disconnect() method in the parent or in the child. After disconnecting it is no longer possible to send messages. An alternative way to check if you can send messages is to see if the child.connected property is true.

Event: 'message'#

Messages send by .send(message, [sendHandle]) are obtained using the message event.

child.stdin#

A Writable Stream that represents the child process's stdin. Closing this stream via end() often causes the child process to terminate.

If the child stdio streams are shared with the parent, then this will not be set.

child.stdout#

A Readable Stream that represents the child process's stdout.

If the child stdio streams are shared with the parent, then this will not be set.

child.stderr#

A Readable Stream that represents the child process's stderr.

If the child stdio streams are shared with the parent, then this will not be set.

child.pid#

The PID of the child process.

Example:

var spawn = require('child_process').spawn,
    grep  = spawn('grep', ['ssh']);

console.log('Spawned child pid: ' + grep.pid);
grep.stdin.end();

child.kill([signal])#

Send a signal to the child process. If no argument is given, the process will be sent 'SIGTERM'. See signal(7) for a list of available signals.

var spawn = require('child_process').spawn,
    grep  = spawn('grep', ['ssh']);

grep.on('exit', function (code, signal) {
  console.log('child process terminated due to receipt of signal '+signal);
});

// send SIGHUP to process
grep.kill('SIGHUP');

Note that while the function is called kill, the signal delivered to the child process may not actually kill it. kill really just sends a signal to a process.

See kill(2)

child.send(message, [sendHandle])#

When using child_process.fork() you can write to the child using child.send(message, [sendHandle]) and messages are received by a 'message' event on the child.

For example:

var cp = require('child_process');

var n = cp.fork(__dirname + '/sub.js');

n.on('message', function(m) {
  console.log('PARENT got message:', m);
});

n.send({ hello: 'world' });

And then the child script, 'sub.js' might look like this:

process.on('message', function(m) {
  console.log('CHILD got message:', m);
});

process.send({ foo: 'bar' });

In the child the process object will have a send() method, and process will emit objects each time it receives a message on its channel.

There is a special case when sending a {cmd: 'NODE_foo'} message. All messages containing a NODE_ prefix in its cmd property will not be emitted in the message event, since they are internal messages used by node core. Messages containing the prefix are emitted in the internalMessage event, you should by all means avoid using this feature, it is subject to change without notice.

The sendHandle option to child.send() is for sending a TCP server or socket object to another process. The child will receive the object as its second argument to the message event.

send server object

Here is an example of sending a server:

var child = require('child_process').fork('child.js');

// Open up the server object and send the handle.
var server = require('net').createServer();
server.on('connection', function (socket) {
  socket.end('handled by parent');
});
server.listen(1337, function() {
  child.send('server', server);
});

And the child would the recive the server object as:

process.on('message', function(m, server) {
  if (m === 'server') {
    server.on('connection', function (socket) {
      socket.end('handled by child');
    });
  }
});

Note that the server is now shared between the parent and child, this means that some connections will be handled by the parent and some by the child.

send socket object

Here is an example of sending a socket. It will spawn two childs and handle connections with the remote address 74.125.127.100 as VIP by sending the socket to a "special" child process. Other sockets will go to a "normal" process.

var normal = require('child_process').fork('child.js', ['normal']);
var special = require('child_process').fork('child.js', ['special']);

// Open up the server and send sockets to child
var server = require('net').createServer();
server.on('connection', function (socket) {

  // if this is a VIP
  if (socket.remoteAddress === '74.125.127.100') {
    special.send('socket', socket);
    return;
  }
  // just the usual dudes
  normal.send('socket', socket);
});
server.listen(1337);

The child.js could look like this:

process.on('message', function(m, socket) {
  if (m === 'socket') {
    socket.end('You where handled as a ' + process.argv[2] + ' person');
  }
});

Note that once a single socket has been sent to a child the parent can no longer keep track of when the socket is destroyed. To indicate this condition the .connections property becomes null. It is also recomended not to use .maxConnections in this condition.

child.disconnect()#

To close the IPC connection between parent and child use the child.disconnect() method. This allows the child to exit gracefully since there is no IPC channel keeping it alive. When calling this method the disconnect event will be emitted in both parent and child, and the connected flag will be set to false. Please note that you can also call process.disconnect() in the child process.

child_process.spawn(command, [args], [options])#

Launches a new process with the given command, with command line arguments in args. If omitted, args defaults to an empty Array.

The third argument is used to specify additional options, which defaults to:

{ cwd: undefined,
  env: process.env
}

cwd allows you to specify the working directory from which the process is spawned. Use env to specify environment variables that will be visible to the new process.

Example of running ls -lh /usr, capturing stdout, stderr, and the exit code:

var util  = require('util'),
    spawn = require('child_process').spawn,
    ls    = spawn('ls', ['-lh', '/usr']);

ls.stdout.on('data', function (data) {
  console.log('stdout: ' + data);
});

ls.stderr.on('data', function (data) {
  console.log('stderr: ' + data);
});

ls.on('exit', function (code) {
  console.log('child process exited with code ' + code);
});

Example: A very elaborate way to run 'ps ax | grep ssh'

var util  = require('util'),
    spawn = require('child_process').spawn,
    ps    = spawn('ps', ['ax']),
    grep  = spawn('grep', ['ssh']);

ps.stdout.on('data', function (data) {
  grep.stdin.write(data);
});

ps.stderr.on('data', function (data) {
  console.log('ps stderr: ' + data);
});

ps.on('exit', function (code) {
  if (code !== 0) {
    console.log('ps process exited with code ' + code);
  }
  grep.stdin.end();
});

grep.stdout.on('data', function (data) {
  console.log(data);
});

grep.stderr.on('data', function (data) {
  console.log('grep stderr: ' + data);
});

grep.on('exit', function (code) {
  if (code !== 0) {
    console.log('grep process exited with code ' + code);
  }
});

Example of checking for failed exec:

var spawn = require('child_process').spawn,
    child = spawn('bad_command');

child.stderr.setEncoding('utf8');
child.stderr.on('data', function (data) {
  if (/^execvp\(\)/.test(data)) {
    console.log('Failed to start child process.');
  }
});

Note that if spawn receives an empty options object, it will result in spawning the process with an empty environment rather than using process.env. This due to backwards compatibility issues with a deprecated API.

The 'stdio' option to child_process.spawn() is an array where each index corresponds to a fd in the child. The value is one of the following:

1. 'pipe' - Create a pipe between the child process and the parent process. The parent end of the pipe is exposed to the parent as a property on the child_process object as ChildProcess.stdio[fd]. Pipes created for fds 0 - 2 are also available as ChildProcess.stdin, ChildProcess.stdout and ChildProcess.stderr, respectively.
2. 'ipc' - Create an IPC channel for passing messages/file descriptors between parent and child. A ChildProcess may have at most one IPC stdio file descriptor. Setting this option enables the ChildProcess.send() method. If the child writes JSON messages to this file descriptor, then this will trigger ChildProcess.on('message'). If the child is a Node.js program, then the presence of an IPC channel will enable process.send() and process.on('message').
3. 'ignore' - Do not set this file descriptor in the child. Note that Node will always open fd 0 - 2 for the processes it spawns. When any of these is ignored node will open /dev/null and attach it to the child's fd.
4. Stream object - Share a readable or writable stream that refers to a tty, file, socket, or a pipe with the child process. The stream's underlying file descriptor is duplicated in the child process to the fd that corresponds to the index in the stdio array.
5. Positive integer - The integer value is interpreted as a file descriptor that is is currently open in the parent process. It is shared with the child process, similar to how Stream objects can be shared.
6. null, undefined - Use default value. For stdio fds 0, 1 and 2 (in other words, stdin, stdout, and stderr) a pipe is created. For fd 3 and up, the default is 'ignore'.

As a shorthand, the stdio argument may also be one of the following strings, rather than an array:

• ignore - ['ignore', 'ignore', 'ignore']
• pipe - ['pipe', 'pipe', 'pipe']
• inherit - [process.stdin, process.stdout, process.stderr] or [0,1,2]

Example:

var spawn = require('child_process').spawn;

// Child will use parent's stdios
spawn('prg', [], { stdio: 'inherit' });

// Spawn child sharing only stderr
spawn('prg', [], { stdio: ['pipe', 'pipe', process.stderr] });

// Open an extra fd=4, to interact with programs present a
// startd-style interface.
spawn('prg', [], { stdio: ['pipe', null, null, null, 'pipe'] });

If the detached option is set, the child process will be made the leader of a new process group. This makes it possible for the child to continue running after the parent exits.

By default, the parent will wait for the detached child to exit. To prevent the parent from waiting for a given child, use the child.unref() method, and the parent's event loop will not include the child in its reference count.

Example of detaching a long-running process and redirecting its output to a file:

 var fs = require('fs'),
     spawn = require('child_process').spawn,
     out = fs.openSync('./out.log', 'a'),
     err = fs.openSync('./out.log', 'a');

 var child = spawn('prg', [], {
   detached: 'true',
   stdio: [ 'ignore', out, err ]
 });

 child.unref();

When using the detached option to start a long-running process, the process will not stay running in the background unless it is provided with a stdio configuration that is not connected to the parent. If the parent's stdio is inherited, the child will remain attached to the controlling terminal.

There is a deprecated option called customFds which allows one to specify specific file descriptors for the stdio of the child process. This API was not portable to all platforms and therefore removed. With customFds it was possible to hook up the new process' [stdin, stdout, stderr] to existing streams; -1 meant that a new stream should be created. Use at your own risk.

There are several internal options. In particular stdinStream, stdoutStream, stderrStream. They are for INTERNAL USE ONLY. As with all undocumented APIs in Node, they should not be used.

See also: child_process.exec() and child_process.fork()

child_process.exec(command, [options], callback)#

Runs a command in a shell and buffers the output.

var util = require('util'),
    exec = require('child_process').exec,
    child;

child = exec('cat *.js bad_file | wc -l',
  function (error, stdout, stderr) {
    console.log('stdout: ' + stdout);
    console.log('stderr: ' + stderr);
    if (error !== null) {
      console.log('exec error: ' + error);
    }
});

The callback gets the arguments (error, stdout, stderr). On success, error will be null. On error, error will be an instance of Error and err.code will be the exit code of the child process, and err.signal will be set to the signal that terminated the process.

There is a second optional argument to specify several options. The default options are

{ encoding: 'utf8',
  timeout: 0,
  maxBuffer: 200*1024,
  killSignal: 'SIGTERM',
  cwd: null,
  env: null }

If timeout is greater than 0, then it will kill the child process if it runs longer than timeout milliseconds. The child process is killed with killSignal (default: 'SIGTERM'). maxBuffer specifies the largest amount of data allowed on stdout or stderr - if this value is exceeded then the child process is killed.

child_process.execFile(file, args, options, callback)#

This is similar to child_process.exec() except it does not execute a subshell but rather the specified file directly. This makes it slightly leaner than child_process.exec. It has the same options.

child_process.fork(modulePath, [args], [options])#

This is a special case of the spawn() functionality for spawning Node processes. In addition to having all the methods in a normal ChildProcess instance, the returned object has a communication channel built-in. See child.send(message, [sendHandle]) for details.

By default the spawned Node process will have the stdout, stderr associated with the parent's. To change this behavior set the silent property in the options object to true.

These child Nodes are still whole new instances of V8. Assume at least 30ms startup and 10mb memory for each new Node. That is, you cannot create many thousands of them.