Table of Contents

• File system
  • Synchronous example
  • Callback example
  • Promise example
  • Ordering of callback and promise-based operations
  • File paths
    • URL object support
  • File descriptors
  • Threadpool usage
  • Class: fs.Dir
    • dir.close()
    • dir.close(callback)
    • dir.closeSync()
    • dir.path
    • dir.read()
    • dir.read(callback)
    • dir.readSync()
    • dir[Symbol.asyncIterator]()
  • Class: fs.Dirent
    • dirent.isBlockDevice()
    • dirent.isCharacterDevice()
    • dirent.isDirectory()
    • dirent.isFIFO()
    • dirent.isFile()
    • dirent.isSocket()
    • dirent.isSymbolicLink()
    • dirent.name
  • Class: fs.FSWatcher
    • Event: 'change'
    • Event: 'close'
    • Event: 'error'
    • watcher.close()
    • watcher.ref()
    • watcher.unref()
  • Class: fs.StatWatcher
    • watcher.ref()
    • watcher.unref()
  • Class: fs.ReadStream
    • Event: 'close'
    • Event: 'open'
    • Event: 'ready'
    • readStream.bytesRead
    • readStream.path
    • readStream.pending
  • Class: fs.Stats
    • stats.isBlockDevice()
    • stats.isCharacterDevice()
    • stats.isDirectory()
    • stats.isFIFO()
    • stats.isFile()
    • stats.isSocket()
    • stats.isSymbolicLink()
    • stats.dev
    • stats.ino
    • stats.mode
    • stats.nlink
    • stats.uid
    • stats.gid
    • stats.rdev
    • stats.size
    • stats.blksize
    • stats.blocks
    • stats.atimeMs
    • stats.mtimeMs
    • stats.ctimeMs
    • stats.birthtimeMs
    • stats.atimeNs
    • stats.mtimeNs
    • stats.ctimeNs
    • stats.birthtimeNs
    • stats.atime
    • stats.mtime
    • stats.ctime
    • stats.birthtime
    • Stat time values
  • Class: fs.WriteStream
    • Event: 'close'
    • Event: 'open'
    • Event: 'ready'
    • writeStream.bytesWritten
    • writeStream.path
    • writeStream.pending
  • fs.access(path[, mode], callback)
  • fs.accessSync(path[, mode])
  • fs.appendFile(path, data[, options], callback)
  • fs.appendFileSync(path, data[, options])
  • fs.chmod(path, mode, callback)
    • File modes
  • fs.chmodSync(path, mode)
  • fs.chown(path, uid, gid, callback)
  • fs.chownSync(path, uid, gid)
  • fs.close(fd, callback)
  • fs.closeSync(fd)
  • fs.constants
  • fs.copyFile(src, dest[, mode], callback)
  • fs.copyFileSync(src, dest[, mode])
  • fs.createReadStream(path[, options])
  • fs.createWriteStream(path[, options])
  • fs.exists(path, callback)
  • fs.existsSync(path)
  • fs.fchmod(fd, mode, callback)
  • fs.fchmodSync(fd, mode)
  • fs.fchown(fd, uid, gid, callback)
  • fs.fchownSync(fd, uid, gid)
  • fs.fdatasync(fd, callback)
  • fs.fdatasyncSync(fd)
  • fs.fstat(fd[, options], callback)
  • fs.fstatSync(fd[, options])
  • fs.fsync(fd, callback)
  • fs.fsyncSync(fd)
  • fs.ftruncate(fd[, len], callback)
  • fs.ftruncateSync(fd[, len])
  • fs.futimes(fd, atime, mtime, callback)
  • fs.futimesSync(fd, atime, mtime)
  • fs.lchmod(path, mode, callback)
  • fs.lchmodSync(path, mode)
  • fs.lchown(path, uid, gid, callback)
  • fs.lchownSync(path, uid, gid)
  • fs.lutimes(path, atime, mtime, callback)
  • fs.lutimesSync(path, atime, mtime)
  • fs.link(existingPath, newPath, callback)
  • fs.linkSync(existingPath, newPath)
  • fs.lstat(path[, options], callback)
  • fs.lstatSync(path[, options])
  • fs.mkdir(path[, options], callback)
  • fs.mkdirSync(path[, options])
  • fs.mkdtemp(prefix[, options], callback)
  • fs.mkdtempSync(prefix[, options])
  • fs.open(path[, flags[, mode]], callback)
  • fs.opendir(path[, options], callback)
  • fs.opendirSync(path[, options])
  • fs.openSync(path[, flags, mode])
  • fs.read(fd, buffer, offset, length, position, callback)
  • fs.read(fd, [options,] callback)
  • fs.readdir(path[, options], callback)
  • fs.readdirSync(path[, options])
  • fs.readFile(path[, options], callback)
    • File descriptors
  • fs.readFileSync(path[, options])
  • fs.readlink(path[, options], callback)
  • fs.readlinkSync(path[, options])
  • fs.readSync(fd, buffer, offset, length, position)
  • fs.readSync(fd, buffer, [options])
  • fs.readv(fd, buffers[, position], callback)
  • fs.readvSync(fd, buffers[, position])
  • fs.realpath(path[, options], callback)
  • fs.realpath.native(path[, options], callback)
  • fs.realpathSync(path[, options])
  • fs.realpathSync.native(path[, options])
  • fs.rename(oldPath, newPath, callback)
  • fs.renameSync(oldPath, newPath)
  • fs.rmdir(path[, options], callback)
  • fs.rmdirSync(path[, options])
  • fs.rm(path[, options], callback)
  • fs.rmSync(path[, options])
  • fs.stat(path[, options], callback)
  • fs.statSync(path[, options])
  • fs.symlink(target, path[, type], callback)
  • fs.symlinkSync(target, path[, type])
  • fs.truncate(path[, len], callback)
  • fs.truncateSync(path[, len])
  • fs.unlink(path, callback)
  • fs.unlinkSync(path)
  • fs.unwatchFile(filename[, listener])
  • fs.utimes(path, atime, mtime, callback)
  • fs.utimesSync(path, atime, mtime)
  • fs.watch(filename[, options][, listener])
    • Caveats
      • Availability
      • Inodes
      • Filename argument
  • fs.watchFile(filename[, options], listener)
  • fs.write(fd, buffer[, offset[, length[, position]]], callback)
  • fs.write(fd, string[, position[, encoding]], callback)
  • fs.writeFile(file, data[, options], callback)
    • Using fs.writeFile() with file descriptors
  • fs.writeFileSync(file, data[, options])
  • fs.writeSync(fd, buffer[, offset[, length[, position]]])
  • fs.writeSync(fd, string[, position[, encoding]])
  • fs.writev(fd, buffers[, position], callback)
  • fs.writevSync(fd, buffers[, position])
  • fs Promises API
    • Class: FileHandle
      • filehandle.appendFile(data, options)
      • filehandle.chmod(mode)
      • filehandle.chown(uid, gid)
      • filehandle.close()
      • filehandle.datasync()
      • filehandle.fd
      • filehandle.read(buffer, offset, length, position)
      • filehandle.read(options)
      • filehandle.readFile(options)
      • filehandle.readv(buffers[, position])
      • filehandle.stat([options])
      • filehandle.sync()
      • filehandle.truncate(len)
      • filehandle.utimes(atime, mtime)
      • filehandle.write(buffer[, offset[, length[, position]]])
      • filehandle.write(string[, position[, encoding]])
      • filehandle.writeFile(data, options)
      • filehandle.writev(buffers[, position])
    • fsPromises.access(path[, mode])
    • fsPromises.appendFile(path, data[, options])
    • fsPromises.chmod(path, mode)
    • fsPromises.chown(path, uid, gid)
    • fsPromises.copyFile(src, dest[, mode])
    • fsPromises.lchmod(path, mode)
    • fsPromises.lchown(path, uid, gid)
    • fsPromises.lutimes(path, atime, mtime)
    • fsPromises.link(existingPath, newPath)
    • fsPromises.lstat(path[, options])
    • fsPromises.mkdir(path[, options])
    • fsPromises.mkdtemp(prefix[, options])
    • fsPromises.open(path, flags[, mode])
    • fsPromises.opendir(path[, options])
    • fsPromises.readdir(path[, options])
    • fsPromises.readFile(path[, options])
    • fsPromises.readlink(path[, options])
    • fsPromises.realpath(path[, options])
    • fsPromises.rename(oldPath, newPath)
    • fsPromises.rmdir(path[, options])
    • fsPromises.rm(path[, options])
    • fsPromises.stat(path[, options])
    • fsPromises.symlink(target, path[, type])
    • fsPromises.truncate(path[, len])
    • fsPromises.unlink(path)
    • fsPromises.utimes(path, atime, mtime)
    • fsPromises.writeFile(file, data[, options])
  • FS constants
    • File access constants
    • File copy constants
    • File open constants
    • File type constants
    • File mode constants
  • File system flags

File system#

Source Code: lib/fs.js

The fs module enables interacting with the file system in a way modeled on standard POSIX functions.

To use this module:

const fs = require('fs');

All file system operations have synchronous, callback, and promise-based forms.

Synchronous example#

The synchronous form blocks the Node.js event loop and further JavaScript execution until the operation is complete. Exceptions are thrown immediately and can be handled using try…catch, or can be allowed to bubble up.

const fs = require('fs');

try {
  fs.unlinkSync('/tmp/hello');
  console.log('successfully deleted /tmp/hello');
} catch (err) {
  // handle the error
}

Callback example#

The callback form takes a completion callback function as its last argument and invokes the operation asynchronously. The arguments passed to the completion callback depend on the method, but the first argument is always reserved for an exception. If the operation is completed successfully, then the first argument is null or undefined.

const fs = require('fs');

fs.unlink('/tmp/hello', (err) => {
  if (err) throw err;
  console.log('successfully deleted /tmp/hello');
});

Promise example#

Promise-based operations return a Promise that is resolved when the asynchronous operation is complete.

const fs = require('fs/promises');

(async function(path) {
  try {
    await fs.unlink(path);
    console.log(`successfully deleted ${path}`);
  } catch (error) {
    console.error('there was an error:', error.message);
  }
})('/tmp/hello');

Ordering of callback and promise-based operations#

There is no guaranteed ordering when using either the callback or promise-based methods. For example, the following is prone to error because the fs.stat() operation might complete before the fs.rename() operation:

fs.rename('/tmp/hello', '/tmp/world', (err) => {
  if (err) throw err;
  console.log('renamed complete');
});
fs.stat('/tmp/world', (err, stats) => {
  if (err) throw err;
  console.log(`stats: ${JSON.stringify(stats)}`);
});

To correctly order the operations, move the fs.stat() call into the callback of the fs.rename() operation:

fs.rename('/tmp/hello', '/tmp/world', (err) => {
  if (err) throw err;
  fs.stat('/tmp/world', (err, stats) => {
    if (err) throw err;
    console.log(`stats: ${JSON.stringify(stats)}`);
  });
});

Or, use the promise-based API:

const fs = require('fs/promises');

(async function(from, to) {
  try {
    await fs.rename(from, to);
    const stats = await fs.stat(to);
    console.log(`stats: ${JSON.stringify(stats)}`);
  } catch (error) {
    console.error('there was an error:', error.message);
  }
})('/tmp/hello', '/tmp/world');

File paths#

Most fs operations accept filepaths that may be specified in the form of a string, a Buffer, or a URL object using the file: protocol.

String form paths are interpreted as UTF-8 character sequences identifying the absolute or relative filename. Relative paths will be resolved relative to the current working directory as determined by calling process.cwd().

Example using an absolute path on POSIX:

const fs = require('fs');

fs.open('/open/some/file.txt', 'r', (err, fd) => {
  if (err) throw err;
  fs.close(fd, (err) => {
    if (err) throw err;
  });
});

Example using a relative path on POSIX (relative to process.cwd()):

fs.open('file.txt', 'r', (err, fd) => {
  if (err) throw err;
  fs.close(fd, (err) => {
    if (err) throw err;
  });
});

Paths specified using a Buffer are useful primarily on certain POSIX operating systems that treat file paths as opaque byte sequences. On such systems, it is possible for a single file path to contain sub-sequences that use multiple character encodings. As with string paths, Buffer paths may be relative or absolute:

Example using an absolute path on POSIX:

fs.open(Buffer.from('/open/some/file.txt'), 'r', (err, fd) => {
  if (err) throw err;
  fs.close(fd, (err) => {
    if (err) throw err;
  });
});

On Windows, Node.js follows the concept of per-drive working directory. This behavior can be observed when using a drive path without a backslash. For example fs.readdirSync('C:\\') can potentially return a different result than fs.readdirSync('C:'). For more information, see this MSDN page.

URL object support#

For most fs module functions, the path or filename argument may be passed as a WHATWG URL object. Only URL objects using the file: protocol are supported.

const fs = require('fs');
const fileUrl = new URL('file:///tmp/hello');

fs.readFileSync(fileUrl);

file: URLs are always absolute paths.

Using WHATWG URL objects might introduce platform-specific behaviors.

On Windows, file: URLs with a host name convert to UNC paths, while file: URLs with drive letters convert to local absolute paths. file: URLs without a host name nor a drive letter will result in a throw:

// On Windows :

// - WHATWG file URLs with hostname convert to UNC path
// file://hostname/p/a/t/h/file => \\hostname\p\a\t\h\file
fs.readFileSync(new URL('file://hostname/p/a/t/h/file'));

// - WHATWG file URLs with drive letters convert to absolute path
// file:///C:/tmp/hello => C:\tmp\hello
fs.readFileSync(new URL('file:///C:/tmp/hello'));

// - WHATWG file URLs without hostname must have a drive letters
fs.readFileSync(new URL('file:///notdriveletter/p/a/t/h/file'));
fs.readFileSync(new URL('file:///c/p/a/t/h/file'));
// TypeError [ERR_INVALID_FILE_URL_PATH]: File URL path must be absolute

file: URLs with drive letters must use : as a separator just after the drive letter. Using another separator will result in a throw.

On all other platforms, file: URLs with a host name are unsupported and will result in a throw:

// On other platforms:

// - WHATWG file URLs with hostname are unsupported
// file://hostname/p/a/t/h/file => throw!
fs.readFileSync(new URL('file://hostname/p/a/t/h/file'));
// TypeError [ERR_INVALID_FILE_URL_PATH]: must be absolute

// - WHATWG file URLs convert to absolute path
// file:///tmp/hello => /tmp/hello
fs.readFileSync(new URL('file:///tmp/hello'));

A file: URL having encoded slash characters will result in a throw on all platforms:

// On Windows
fs.readFileSync(new URL('file:///C:/p/a/t/h/%2F'));
fs.readFileSync(new URL('file:///C:/p/a/t/h/%2f'));
/* TypeError [ERR_INVALID_FILE_URL_PATH]: File URL path must not include encoded
\ or / characters */

// On POSIX
fs.readFileSync(new URL('file:///p/a/t/h/%2F'));
fs.readFileSync(new URL('file:///p/a/t/h/%2f'));
/* TypeError [ERR_INVALID_FILE_URL_PATH]: File URL path must not include encoded
/ characters */

On Windows, file: URLs having encoded backslash will result in a throw:

// On Windows
fs.readFileSync(new URL('file:///C:/path/%5C'));
fs.readFileSync(new URL('file:///C:/path/%5c'));
/* TypeError [ERR_INVALID_FILE_URL_PATH]: File URL path must not include encoded
\ or / characters */

File descriptors#

On POSIX systems, for every process, the kernel maintains a table of currently open files and resources. Each open file is assigned a simple numeric identifier called a file descriptor. At the system-level, all file system operations use these file descriptors to identify and track each specific file. Windows systems use a different but conceptually similar mechanism for tracking resources. To simplify things for users, Node.js abstracts away the specific differences between operating systems and assigns all open files a numeric file descriptor.

The fs.open() method is used to allocate a new file descriptor. Once allocated, the file descriptor may be used to read data from, write data to, or request information about the file.

fs.open('/open/some/file.txt', 'r', (err, fd) => {
  if (err) throw err;
  fs.fstat(fd, (err, stat) => {
    if (err) throw err;
    // use stat

    // always close the file descriptor!
    fs.close(fd, (err) => {
      if (err) throw err;
    });
  });
});

Most operating systems limit the number of file descriptors that may be open at any given time so it is critical to close the descriptor when operations are completed. Failure to do so will result in a memory leak that will eventually cause an application to crash.

Threadpool usage#

All file system APIs except fs.FSWatcher() and those that are explicitly synchronous use libuv's threadpool, which can have surprising and negative performance implications for some applications. See the UV_THREADPOOL_SIZE documentation for more information.

Class: fs.Dir#

A class representing a directory stream.

Created by fs.opendir(), fs.opendirSync(), or fsPromises.opendir().

const fs = require('fs');

async function print(path) {
  const dir = await fs.promises.opendir(path);
  for await (const dirent of dir) {
    console.log(dirent.name);
  }
}
print('./').catch(console.error);

dir.close()#

• Returns: <Promise>

Asynchronously close the directory's underlying resource handle. Subsequent reads will result in errors.

A Promise is returned that will be resolved after the resource has been closed.

dir.close(callback)#

• callback <Function>
  • err <Error>

Asynchronously close the directory's underlying resource handle. Subsequent reads will result in errors.

The callback will be called after the resource handle has been closed.

dir.closeSync()#

Synchronously close the directory's underlying resource handle. Subsequent reads will result in errors.

dir.path#

• <string>

The read-only path of this directory as was provided to fs.opendir(), fs.opendirSync(), or fsPromises.opendir().

dir.read()#

• Returns: <Promise> containing <fs.Dirent> | <null>

Asynchronously read the next directory entry via readdir(3) as an fs.Dirent.

After the read is completed, a Promise is returned that will be resolved with an fs.Dirent, or null if there are no more directory entries to read.

Directory entries returned by this function are in no particular order as provided by the operating system's underlying directory mechanisms. Entries added or removed while iterating over the directory might not be included in the iteration results.

dir.read(callback)#

• callback <Function>
  • err <Error>
  • dirent <fs.Dirent> | <null>

Asynchronously read the next directory entry via readdir(3) as an fs.Dirent.

After the read is completed, the callback will be called with an fs.Dirent, or null if there are no more directory entries to read.

Directory entries returned by this function are in no particular order as provided by the operating system's underlying directory mechanisms. Entries added or removed while iterating over the directory might not be included in the iteration results.

dir.readSync()#

• Returns: <fs.Dirent> | <null>

Synchronously read the next directory entry via readdir(3) as an fs.Dirent.

If there are no more directory entries to read, null will be returned.

Directory entries returned by this function are in no particular order as provided by the operating system's underlying directory mechanisms. Entries added or removed while iterating over the directory might not be included in the iteration results.

dir[Symbol.asyncIterator]()#

• Returns: <AsyncIterator> of <fs.Dirent>

Asynchronously iterates over the directory via readdir(3) until all entries have been read.

Entries returned by the async iterator are always an fs.Dirent. The null case from dir.read() is handled internally.

See fs.Dir for an example.

Directory entries returned by this iterator are in no particular order as provided by the operating system's underlying directory mechanisms. Entries added or removed while iterating over the directory might not be included in the iteration results.

Class: fs.Dirent#

A representation of a directory entry, which can be a file or a subdirectory within the directory, as returned by reading from an fs.Dir. The directory entry is a combination of the file name and file type pairs.

Additionally, when fs.readdir() or fs.readdirSync() is called with the withFileTypes option set to true, the resulting array is filled with fs.Dirent objects, rather than strings or Buffers.

dirent.isBlockDevice()#

• Returns: <boolean>

Returns true if the fs.Dirent object describes a block device.

dirent.isCharacterDevice()#

• Returns: <boolean>

Returns true if the fs.Dirent object describes a character device.

dirent.isDirectory()#

• Returns: <boolean>

Returns true if the fs.Dirent object describes a file system directory.

dirent.isFIFO()#

• Returns: <boolean>

Returns true if the fs.Dirent object describes a first-in-first-out (FIFO) pipe.

dirent.isFile()#

• Returns: <boolean>

Returns true if the fs.Dirent object describes a regular file.

dirent.isSocket()#

• Returns: <boolean>

Returns true if the fs.Dirent object describes a socket.

dirent.isSymbolicLink()#

• Returns: <boolean>

Returns true if the fs.Dirent object describes a symbolic link.

dirent.name#

• <string> | <Buffer>

The file name that this fs.Dirent object refers to. The type of this value is determined by the options.encoding passed to fs.readdir() or fs.readdirSync().

Class: fs.FSWatcher#

• Extends <EventEmitter>

A successful call to fs.watch() method will return a new fs.FSWatcher object.

All fs.FSWatcher objects emit a 'change' event whenever a specific watched file is modified.

Event: 'change'#

• eventType <string> The type of change event that has occurred
• filename <string> | <Buffer> The filename that changed (if relevant/available)

Emitted when something changes in a watched directory or file. See more details in fs.watch().

The filename argument may not be provided depending on operating system support. If filename is provided, it will be provided as a Buffer if fs.watch() is called with its encoding option set to 'buffer', otherwise filename will be a UTF-8 string.

// Example when handled through fs.watch() listener
fs.watch('./tmp', { encoding: 'buffer' }, (eventType, filename) => {
  if (filename) {
    console.log(filename);
    // Prints: <Buffer ...>
  }
});

Event: 'close'#

Emitted when the watcher stops watching for changes. The closed fs.FSWatcher object is no longer usable in the event handler.

Event: 'error'#

• error <Error>

Emitted when an error occurs while watching the file. The errored fs.FSWatcher object is no longer usable in the event handler.

watcher.close()#

Stop watching for changes on the given fs.FSWatcher. Once stopped, the fs.FSWatcher object is no longer usable.

watcher.ref()#

• Returns: <fs.FSWatcher>

When called, requests that the Node.js event loop not exit so long as the FSWatcher is active. Calling watcher.ref() multiple times will have no effect.

By default, all FSWatcher objects are "ref'ed", making it normally unnecessary to call watcher.ref() unless watcher.unref() had been called previously.

watcher.unref()#

• Returns: <fs.FSWatcher>

When called, the active FSWatcher object will not require the Node.js event loop to remain active. If there is no other activity keeping the event loop running, the process may exit before the FSWatcher object's callback is invoked. Calling watcher.unref() multiple times will have no effect.

Class: fs.StatWatcher#

• Extends <EventEmitter>

A successful call to fs.watchFile() method will return a new fs.StatWatcher object.

watcher.ref()#

• Returns: <fs.StatWatcher>

When called, requests that the Node.js event loop not exit so long as the StatWatcher is active. Calling watcher.ref() multiple times will have no effect.

By default, all StatWatcher objects are "ref'ed", making it normally unnecessary to call watcher.ref() unless watcher.unref() had been called previously.

watcher.unref()#

• Returns: <fs.StatWatcher>

When called, the active StatWatcher object will not require the Node.js event loop to remain active. If there is no other activity keeping the event loop running, the process may exit before the StatWatcher object's callback is invoked. Calling watcher.unref() multiple times will have no effect.

Class: fs.ReadStream#

• Extends: <stream.Readable>

Instances of fs.ReadStream are created and returned using the fs.createReadStream() function.

Event: 'close'#

Emitted when the fs.ReadStream's underlying file descriptor has been closed.

Event: 'open'#

• fd <integer> Integer file descriptor used by the ReadStream.

Emitted when the fs.ReadStream's file descriptor has been opened.

Event: 'ready'#

Emitted when the fs.ReadStream is ready to be used.

Fires immediately after 'open'.

readStream.bytesRead#

• <number>

The number of bytes that have been read so far.

readStream.path#

• <string> | <Buffer>

The path to the file the stream is reading from as specified in the first argument to fs.createReadStream(). If path is passed as a string, then readStream.path will be a string. If path is passed as a Buffer, then readStream.path will be a Buffer.

readStream.pending#

• <boolean>

This property is true if the underlying file has not been opened yet, i.e. before the 'ready' event is emitted.

Class: fs.Stats#

A fs.Stats object provides information about a file.

Objects returned from fs.stat(), fs.lstat() and fs.fstat() and their synchronous counterparts are of this type. If bigint in the options passed to those methods is true, the numeric values will be bigint instead of number, and the object will contain additional nanosecond-precision properties suffixed with Ns.

Stats {
  dev: 2114,
  ino: 48064969,
  mode: 33188,
  nlink: 1,
  uid: 85,
  gid: 100,
  rdev: 0,
  size: 527,
  blksize: 4096,
  blocks: 8,
  atimeMs: 1318289051000.1,
  mtimeMs: 1318289051000.1,
  ctimeMs: 1318289051000.1,
  birthtimeMs: 1318289051000.1,
  atime: Mon, 10 Oct 2011 23:24:11 GMT,
  mtime: Mon, 10 Oct 2011 23:24:11 GMT,
  ctime: Mon, 10 Oct 2011 23:24:11 GMT,
  birthtime: Mon, 10 Oct 2011 23:24:11 GMT }

bigint version:

BigIntStats {
  dev: 2114n,
  ino: 48064969n,
  mode: 33188n,
  nlink: 1n,
  uid: 85n,
  gid: 100n,
  rdev: 0n,
  size: 527n,
  blksize: 4096n,
  blocks: 8n,
  atimeMs: 1318289051000n,
  mtimeMs: 1318289051000n,
  ctimeMs: 1318289051000n,
  birthtimeMs: 1318289051000n,
  atimeNs: 1318289051000000000n,
  mtimeNs: 1318289051000000000n,
  ctimeNs: 1318289051000000000n,
  birthtimeNs: 1318289051000000000n,
  atime: Mon, 10 Oct 2011 23:24:11 GMT,
  mtime: Mon, 10 Oct 2011 23:24:11 GMT,
  ctime: Mon, 10 Oct 2011 23:24:11 GMT,
  birthtime: Mon, 10 Oct 2011 23:24:11 GMT }

stats.isBlockDevice()#

• Returns: <boolean>

Returns true if the fs.Stats object describes a block device.

stats.isCharacterDevice()#

• Returns: <boolean>

Returns true if the fs.Stats object describes a character device.

stats.isDirectory()#

• Returns: <boolean>

Returns true if the fs.Stats object describes a file system directory.

If the fs.Stats object was obtained from fs.lstat(), this method will always return false. This is because fs.lstat() returns information about a symbolic link itself and not the path it resolves to.

stats.isFIFO()#

• Returns: <boolean>

Returns true if the fs.Stats object describes a first-in-first-out (FIFO) pipe.

stats.isFile()#

• Returns: <boolean>

Returns true if the fs.Stats object describes a regular file.

stats.isSocket()#

• Returns: <boolean>

Returns true if the fs.Stats object describes a socket.

stats.isSymbolicLink()#

• Returns: <boolean>

Returns true if the fs.Stats object describes a symbolic link.

This method is only valid when using fs.lstat().

stats.dev#

• <number> | <bigint>

The numeric identifier of the device containing the file.

stats.ino#

• <number> | <bigint>

The file system specific "Inode" number for the file.

stats.mode#

• <number> | <bigint>

A bit-field describing the file type and mode.

stats.nlink#

• <number> | <bigint>

The number of hard-links that exist for the file.

stats.uid#

• <number> | <bigint>

The numeric user identifier of the user that owns the file (POSIX).

stats.gid#

• <number> | <bigint>

The numeric group identifier of the group that owns the file (POSIX).

stats.rdev#

• <number> | <bigint>

A numeric device identifier if the file represents a device.

stats.size#

• <number> | <bigint>

The size of the file in bytes.

stats.blksize#

• <number> | <bigint>

The file system block size for i/o operations.

stats.blocks#

• <number> | <bigint>

The number of blocks allocated for this file.

stats.atimeMs#

• <number> | <bigint>

The timestamp indicating the last time this file was accessed expressed in milliseconds since the POSIX Epoch.

stats.mtimeMs#

• <number> | <bigint>

The timestamp indicating the last time this file was modified expressed in milliseconds since the POSIX Epoch.

stats.ctimeMs#

• <number> | <bigint>

The timestamp indicating the last time the file status was changed expressed in milliseconds since the POSIX Epoch.

stats.birthtimeMs#

• <number> | <bigint>

The timestamp indicating the creation time of this file expressed in milliseconds since the POSIX Epoch.

stats.atimeNs#

• <bigint>

Only present when bigint: true is passed into the method that generates the object. The timestamp indicating the last time this file was accessed expressed in nanoseconds since the POSIX Epoch.

stats.mtimeNs#

• <bigint>

Only present when bigint: true is passed into the method that generates the object. The timestamp indicating the last time this file was modified expressed in nanoseconds since the POSIX Epoch.

stats.ctimeNs#

• <bigint>

Only present when bigint: true is passed into the method that generates the object. The timestamp indicating the last time the file status was changed expressed in nanoseconds since the POSIX Epoch.

stats.birthtimeNs#

• <bigint>

Only present when bigint: true is passed into the method that generates the object. The timestamp indicating the creation time of this file expressed in nanoseconds since the POSIX Epoch.

stats.atime#

• <Date>

The timestamp indicating the last time this file was accessed.

stats.mtime#

• <Date>

The timestamp indicating the last time this file was modified.

stats.ctime#

• <Date>

The timestamp indicating the last time the file status was changed.

stats.birthtime#

• <Date>

The timestamp indicating the creation time of this file.

Stat time values#

The atimeMs, mtimeMs, ctimeMs, birthtimeMs properties are numeric values that hold the corresponding times in milliseconds. Their precision is platform specific. When bigint: true is passed into the method that generates the object, the properties will be bigints, otherwise they will be numbers.

The atimeNs, mtimeNs, ctimeNs, birthtimeNs properties are bigints that hold the corresponding times in nanoseconds. They are only present when bigint: true is passed into the method that generates the object. Their precision is platform specific.

atime, mtime, ctime, and birthtime are Date object alternate representations of the various times. The Date and number values are not connected. Assigning a new number value, or mutating the Date value, will not be reflected in the corresponding alternate representation.

The times in the stat object have the following semantics:

• atime "Access Time": Time when file data last accessed. Changed by the mknod(2), utimes(2), and read(2) system calls.
• mtime "Modified Time": Time when file data last modified. Changed by the mknod(2), utimes(2), and write(2) system calls.
• ctime "Change Time": Time when file status was last changed (inode data modification). Changed by the chmod(2), chown(2), link(2), mknod(2), rename(2), unlink(2), utimes(2), read(2), and write(2) system calls.
• birthtime "Birth Time": Time of file creation. Set once when the file is created. On filesystems where birthtime is not available, this field may instead hold either the ctime or 1970-01-01T00:00Z (ie, Unix epoch timestamp 0). This value may be greater than atime or mtime in this case. On Darwin and other FreeBSD variants, also set if the atime is explicitly set to an earlier value than the current birthtime using the utimes(2) system call.

Prior to Node.js 0.12, the ctime held the birthtime on Windows systems. As of 0.12, ctime is not "creation time", and on Unix systems, it never was.

Class: fs.WriteStream#

• Extends <stream.Writable>

Instances of fs.WriteStream are created and returned using the fs.createWriteStream() function.

Event: 'close'#

Emitted when the WriteStream's underlying file descriptor has been closed.

Event: 'open'#

• fd <integer> Integer file descriptor used by the WriteStream.

Emitted when the WriteStream's file is opened.

Event: 'ready'#

Emitted when the fs.WriteStream is ready to be used.

Fires immediately after 'open'.

writeStream.bytesWritten#

The number of bytes written so far. Does not include data that is still queued for writing.

writeStream.path#

The path to the file the stream is writing to as specified in the first argument to fs.createWriteStream(). If path is passed as a string, then writeStream.path will be a string. If path is passed as a Buffer, then writeStream.path will be a Buffer.

writeStream.pending#

• <boolean>

This property is true if the underlying file has not been opened yet, i.e. before the 'ready' event is emitted.

fs.access(path[, mode], callback)#

• path <string> | <Buffer> | <URL>
• mode <integer> Default: fs.constants.F_OK
• callback <Function>
  • err <Error>

Tests a user's permissions for the file or directory specified by path. The mode argument is an optional integer that specifies the accessibility checks to be performed. Check File access constants for possible values of mode. It is possible to create a mask consisting of the bitwise OR of two or more values (e.g. fs.constants.W_OK | fs.constants.R_OK).

The final argument, callback, is a callback function that is invoked with a possible error argument. If any of the accessibility checks fail, the error argument will be an Error object. The following examples check if package.json exists, and if it is readable or writable.

const file = 'package.json';

// Check if the file exists in the current directory.
fs.access(file, fs.constants.F_OK, (err) => {
  console.log(`${file} ${err ? 'does not exist' : 'exists'}`);
});

// Check if the file is readable.
fs.access(file, fs.constants.R_OK, (err) => {
  console.log(`${file} ${err ? 'is not readable' : 'is readable'}`);
});

// Check if the file is writable.
fs.access(file, fs.constants.W_OK, (err) => {
  console.log(`${file} ${err ? 'is not writable' : 'is writable'}`);
});

// Check if the file exists in the current directory, and if it is writable.
fs.access(file, fs.constants.F_OK | fs.constants.W_OK, (err) => {
  if (err) {
    console.error(
      `${file} ${err.code === 'ENOENT' ? 'does not exist' : 'is read-only'}`);
  } else {
    console.log(`${file} exists, and it is writable`);
  }
});

Do not use fs.access() to check for the accessibility of a file before calling fs.open(), fs.readFile() or fs.writeFile(). Doing so introduces a race condition, since other processes may change the file's state between the two calls. Instead, user code should open/read/write the file directly and handle the error raised if the file is not accessible.

write (NOT RECOMMENDED)

fs.access('myfile', (err) => {
  if (!err) {
    console.error('myfile already exists');
    return;
  }

  fs.open('myfile', 'wx', (err, fd) => {
    if (err) throw err;
    writeMyData(fd);
  });
});

write (RECOMMENDED)

fs.open('myfile', 'wx', (err, fd) => {
  if (err) {
    if (err.code === 'EEXIST') {
      console.error('myfile already exists');
      return;
    }

    throw err;
  }

  writeMyData(fd);
});

read (NOT RECOMMENDED)

fs.access('myfile', (err) => {
  if (err) {
    if (err.code === 'ENOENT') {
      console.error('myfile does not exist');
      return;
    }

    throw err;
  }

  fs.open('myfile', 'r', (err, fd) => {
    if (err) throw err;
    readMyData(fd);
  });
});

read (RECOMMENDED)

fs.open('myfile', 'r', (err, fd) => {
  if (err) {
    if (err.code === 'ENOENT') {
      console.error('myfile does not exist');
      return;
    }

    throw err;
  }

  readMyData(fd);
});

The "not recommended" examples above check for accessibility and then use the file; the "recommended" examples are better because they use the file directly and handle the error, if any.

In general, check for the accessibility of a file only if the file will not be used directly, for example when its accessibility is a signal from another process.

On Windows, access-control policies (ACLs) on a directory may limit access to a file or directory. The fs.access() function, however, does not check the ACL and therefore may report that a path is accessible even if the ACL restricts the user from reading or writing to it.

fs.accessSync(path[, mode])#

• path <string> | <Buffer> | <URL>
• mode <integer> Default: fs.constants.F_OK

Synchronously tests a user's permissions for the file or directory specified by path. The mode argument is an optional integer that specifies the accessibility checks to be performed. Check File access constants for possible values of mode. It is possible to create a mask consisting of the bitwise OR of two or more values (e.g. fs.constants.W_OK | fs.constants.R_OK).

If any of the accessibility checks fail, an Error will be thrown. Otherwise, the method will return undefined.

try {
  fs.accessSync('etc/passwd', fs.constants.R_OK | fs.constants.W_OK);
  console.log('can read/write');
} catch (err) {
  console.error('no access!');
}

fs.appendFile(path, data[, options], callback)#

• path <string> | <Buffer> | <URL> | <number> filename or file descriptor
• data <string> | <Buffer>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • mode <integer> Default: 0o666
  • flag <string> See support of file system flags. Default: 'a'.
• callback <Function>
  • err <Error>

Asynchronously append data to a file, creating the file if it does not yet exist. data can be a string or a Buffer.

fs.appendFile('message.txt', 'data to append', (err) => {
  if (err) throw err;
  console.log('The "data to append" was appended to file!');
});

If options is a string, then it specifies the encoding:

fs.appendFile('message.txt', 'data to append', 'utf8', callback);

The path may be specified as a numeric file descriptor that has been opened for appending (using fs.open() or fs.openSync()). The file descriptor will not be closed automatically.

fs.open('message.txt', 'a', (err, fd) => {
  if (err) throw err;
  fs.appendFile(fd, 'data to append', 'utf8', (err) => {
    fs.close(fd, (err) => {
      if (err) throw err;
    });
    if (err) throw err;
  });
});

fs.appendFileSync(path, data[, options])#

• path <string> | <Buffer> | <URL> | <number> filename or file descriptor
• data <string> | <Buffer>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • mode <integer> Default: 0o666
  • flag <string> See support of file system flags. Default: 'a'.

Synchronously append data to a file, creating the file if it does not yet exist. data can be a string or a Buffer.

try {
  fs.appendFileSync('message.txt', 'data to append');
  console.log('The "data to append" was appended to file!');
} catch (err) {
  /* Handle the error */
}

If options is a string, then it specifies the encoding:

fs.appendFileSync('message.txt', 'data to append', 'utf8');

The path may be specified as a numeric file descriptor that has been opened for appending (using fs.open() or fs.openSync()). The file descriptor will not be closed automatically.

let fd;

try {
  fd = fs.openSync('message.txt', 'a');
  fs.appendFileSync(fd, 'data to append', 'utf8');
} catch (err) {
  /* Handle the error */
} finally {
  if (fd !== undefined)
    fs.closeSync(fd);
}

fs.chmod(path, mode, callback)#

• path <string> | <Buffer> | <URL>
• mode <string> | <integer>
• callback <Function>
  • err <Error>

Asynchronously changes the permissions of a file. No arguments other than a possible exception are given to the completion callback.

See also: chmod(2).

fs.chmod('my_file.txt', 0o775, (err) => {
  if (err) throw err;
  console.log('The permissions for file "my_file.txt" have been changed!');
});

File modes#

The mode argument used in both the fs.chmod() and fs.chmodSync() methods is a numeric bitmask created using a logical OR of the following constants:

Constant	Octal	Description
fs.constants.S_IRUSR	0o400	read by owner
fs.constants.S_IWUSR	0o200	write by owner
fs.constants.S_IXUSR	0o100	execute/search by owner
fs.constants.S_IRGRP	0o40	read by group
fs.constants.S_IWGRP	0o20	write by group
fs.constants.S_IXGRP	0o10	execute/search by group
fs.constants.S_IROTH	0o4	read by others
fs.constants.S_IWOTH	0o2	write by others
fs.constants.S_IXOTH	0o1	execute/search by others

An easier method of constructing the mode is to use a sequence of three octal digits (e.g. 765). The left-most digit (7 in the example), specifies the permissions for the file owner. The middle digit (6 in the example), specifies permissions for the group. The right-most digit (5 in the example), specifies the permissions for others.

Number	Description
7	read, write, and execute
6	read and write
5	read and execute
4	read only
3	write and execute
2	write only
1	execute only
0	no permission

For example, the octal value 0o765 means:

• The owner may read, write and execute the file.
• The group may read and write the file.
• Others may read and execute the file.

When using raw numbers where file modes are expected, any value larger than 0o777 may result in platform-specific behaviors that are not supported to work consistently. Therefore constants like S_ISVTX, S_ISGID or S_ISUID are not exposed in fs.constants.

Caveats: on Windows only the write permission can be changed, and the distinction among the permissions of group, owner or others is not implemented.

fs.chmodSync(path, mode)#

• path <string> | <Buffer> | <URL>
• mode <string> | <integer>

For detailed information, see the documentation of the asynchronous version of this API: fs.chmod().

See also: chmod(2).

fs.chown(path, uid, gid, callback)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>
• callback <Function>
  • err <Error>

Asynchronously changes owner and group of a file. No arguments other than a possible exception are given to the completion callback.

See also: chown(2).

fs.chownSync(path, uid, gid)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>

Synchronously changes owner and group of a file. Returns undefined. This is the synchronous version of fs.chown().

See also: chown(2).

fs.close(fd, callback)#

• fd <integer>
• callback <Function>
  • err <Error>

Asynchronous close(2). No arguments other than a possible exception are given to the completion callback.

Calling fs.close() on any file descriptor (fd) that is currently in use through any other fs operation may lead to undefined behavior.

fs.closeSync(fd)#

• fd <integer>

Synchronous close(2). Returns undefined.

Calling fs.closeSync() on any file descriptor (fd) that is currently in use through any other fs operation may lead to undefined behavior.

fs.constants#

• <Object>

Returns an object containing commonly used constants for file system operations. The specific constants currently defined are described in FS constants.

fs.copyFile(src, dest[, mode], callback)#

• src <string> | <Buffer> | <URL> source filename to copy
• dest <string> | <Buffer> | <URL> destination filename of the copy operation
• mode <integer> modifiers for copy operation. Default: 0.
• callback <Function>

Asynchronously copies src to dest. By default, dest is overwritten if it already exists. No arguments other than a possible exception are given to the callback function. Node.js makes no guarantees about the atomicity of the copy operation. If an error occurs after the destination file has been opened for writing, Node.js will attempt to remove the destination.

mode is an optional integer that specifies the behavior of the copy operation. It is possible to create a mask consisting of the bitwise OR of two or more values (e.g. fs.constants.COPYFILE_EXCL | fs.constants.COPYFILE_FICLONE).

• fs.constants.COPYFILE_EXCL: The copy operation will fail if dest already exists.
• fs.constants.COPYFILE_FICLONE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then a fallback copy mechanism is used.
• fs.constants.COPYFILE_FICLONE_FORCE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then the operation will fail.

const fs = require('fs');
const { COPYFILE_EXCL } = fs.constants;

function callback(err) {
  if (err) throw err;
  console.log('source.txt was copied to destination.txt');
}

// destination.txt will be created or overwritten by default.
fs.copyFile('source.txt', 'destination.txt', callback);

// By using COPYFILE_EXCL, the operation will fail if destination.txt exists.
fs.copyFile('source.txt', 'destination.txt', COPYFILE_EXCL, callback);

fs.copyFileSync(src, dest[, mode])#

• src <string> | <Buffer> | <URL> source filename to copy
• dest <string> | <Buffer> | <URL> destination filename of the copy operation
• mode <integer> modifiers for copy operation. Default: 0.

Synchronously copies src to dest. By default, dest is overwritten if it already exists. Returns undefined. Node.js makes no guarantees about the atomicity of the copy operation. If an error occurs after the destination file has been opened for writing, Node.js will attempt to remove the destination.

mode is an optional integer that specifies the behavior of the copy operation. It is possible to create a mask consisting of the bitwise OR of two or more values (e.g. fs.constants.COPYFILE_EXCL | fs.constants.COPYFILE_FICLONE).

• fs.constants.COPYFILE_EXCL: The copy operation will fail if dest already exists.
• fs.constants.COPYFILE_FICLONE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then a fallback copy mechanism is used.
• fs.constants.COPYFILE_FICLONE_FORCE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then the operation will fail.

const fs = require('fs');
const { COPYFILE_EXCL } = fs.constants;

// destination.txt will be created or overwritten by default.
fs.copyFileSync('source.txt', 'destination.txt');
console.log('source.txt was copied to destination.txt');

// By using COPYFILE_EXCL, the operation will fail if destination.txt exists.
fs.copyFileSync('source.txt', 'destination.txt', COPYFILE_EXCL);

fs.createReadStream(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • flags <string> See support of file system flags. Default: 'r'.
  • encoding <string> Default: null
  • fd <integer> Default: null
  • mode <integer> Default: 0o666
  • autoClose <boolean> Default: true
  • emitClose <boolean> Default: false
  • start <integer>
  • end <integer> Default: Infinity
  • highWaterMark <integer> Default: 64 * 1024
  • fs <Object> | <null> Default: null
• Returns: <fs.ReadStream> See Readable Stream.

Unlike the 16 kb default highWaterMark for a readable stream, the stream returned by this method has a default highWaterMark of 64 kb.

options can include start and end values to read a range of bytes from the file instead of the entire file. Both start and end are inclusive and start counting at 0, allowed values are in the [0, Number.MAX_SAFE_INTEGER] range. If fd is specified and start is omitted or undefined, fs.createReadStream() reads sequentially from the current file position. The encoding can be any one of those accepted by Buffer.

If fd is specified, ReadStream will ignore the path argument and will use the specified file descriptor. This means that no 'open' event will be emitted. fd should be blocking; non-blocking fds should be passed to net.Socket.

If fd points to a character device that only supports blocking reads (such as keyboard or sound card), read operations do not finish until data is available. This can prevent the process from exiting and the stream from closing naturally.

By default, the stream will not emit a 'close' event after it has been destroyed. This is the opposite of the default for other Readable streams. Set the emitClose option to true to change this behavior.

By providing the fs option, it is possible to override the corresponding fs implementations for open, read, and close. When providing the fs option, overrides for open, read, and close are required.

const fs = require('fs');
// Create a stream from some character device.
const stream = fs.createReadStream('/dev/input/event0');
setTimeout(() => {
  stream.close(); // This may not close the stream.
  // Artificially marking end-of-stream, as if the underlying resource had
  // indicated end-of-file by itself, allows the stream to close.
  // This does not cancel pending read operations, and if there is such an
  // operation, the process may still not be able to exit successfully
  // until it finishes.
  stream.push(null);
  stream.read(0);
}, 100);

If autoClose is false, then the file descriptor won't be closed, even if there's an error. It is the application's responsibility to close it and make sure there's no file descriptor leak. If autoClose is set to true (default behavior), on 'error' or 'end' the file descriptor will be closed automatically.

mode sets the file mode (permission and sticky bits), but only if the file was created.

An example to read the last 10 bytes of a file which is 100 bytes long:

fs.createReadStream('sample.txt', { start: 90, end: 99 });

If options is a string, then it specifies the encoding.

fs.createWriteStream(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • flags <string> See support of file system flags. Default: 'w'.
  • encoding <string> Default: 'utf8'
  • fd <integer> Default: null
  • mode <integer> Default: 0o666
  • autoClose <boolean> Default: true
  • emitClose <boolean> Default: false
  • start <integer>
  • fs <Object> | <null> Default: null
• Returns: <fs.WriteStream> See Writable Stream.

options may also include a start option to allow writing data at some position past the beginning of the file, allowed values are in the [0, Number.MAX_SAFE_INTEGER] range. Modifying a file rather than replacing it may require the flags option to be set to r+ rather than the default w. The encoding can be any one of those accepted by Buffer.

If autoClose is set to true (default behavior) on 'error' or 'finish' the file descriptor will be closed automatically. If autoClose is false, then the file descriptor won't be closed, even if there's an error. It is the application's responsibility to close it and make sure there's no file descriptor leak.

By default, the stream will not emit a 'close' event after it has been destroyed. This is the opposite of the default for other Writable streams. Set the emitClose option to true to change this behavior.

By providing the fs option it is possible to override the corresponding fs implementations for open, write, writev and close. Overriding write() without writev() can reduce performance as some optimizations (_writev()) will be disabled. When providing the fs option, overrides for open, close, and at least one of write and writev are required.

Like ReadStream, if fd is specified, WriteStream will ignore the path argument and will use the specified file descriptor. This means that no 'open' event will be emitted. fd should be blocking; non-blocking fds should be passed to net.Socket.

If options is a string, then it specifies the encoding.

fs.exists(path, callback)#

• path <string> | <Buffer> | <URL>
• callback <Function>
  • exists <boolean>

Test whether or not the given path exists by checking with the file system. Then call the callback argument with either true or false:

fs.exists('/etc/passwd', (exists) => {
  console.log(exists ? 'it\'s there' : 'no passwd!');
});

The parameters for this callback are not consistent with other Node.js callbacks. Normally, the first parameter to a Node.js callback is an err parameter, optionally followed by other parameters. The fs.exists() callback has only one boolean parameter. This is one reason fs.access() is recommended instead of fs.exists().

Using fs.exists() to check for the existence of a file before calling fs.open(), fs.readFile() or fs.writeFile() is not recommended. Doing so introduces a race condition, since other processes may change the file's state between the two calls. Instead, user code should open/read/write the file directly and handle the error raised if the file does not exist.

write (NOT RECOMMENDED)

fs.exists('myfile', (exists) => {
  if (exists) {
    console.error('myfile already exists');
  } else {
    fs.open('myfile', 'wx', (err, fd) => {
      if (err) throw err;
      writeMyData(fd);
    });
  }
});

write (RECOMMENDED)

fs.open('myfile', 'wx', (err, fd) => {
  if (err) {
    if (err.code === 'EEXIST') {
      console.error('myfile already exists');
      return;
    }

    throw err;
  }

  writeMyData(fd);
});

read (NOT RECOMMENDED)

fs.exists('myfile', (exists) => {
  if (exists) {
    fs.open('myfile', 'r', (err, fd) => {
      if (err) throw err;
      readMyData(fd);
    });
  } else {
    console.error('myfile does not exist');
  }
});

read (RECOMMENDED)

fs.open('myfile', 'r', (err, fd) => {
  if (err) {
    if (err.code === 'ENOENT') {
      console.error('myfile does not exist');
      return;
    }

    throw err;
  }

  readMyData(fd);
});

The "not recommended" examples above check for existence and then use the file; the "recommended" examples are better because they use the file directly and handle the error, if any.

In general, check for the existence of a file only if the file won’t be used directly, for example when its existence is a signal from another process.

fs.existsSync(path)#

• path <string> | <Buffer> | <URL>
• Returns: <boolean>

Returns true if the path exists, false otherwise.

For detailed information, see the documentation of the asynchronous version of this API: fs.exists().

fs.exists() is deprecated, but fs.existsSync() is not. The callback parameter to fs.exists() accepts parameters that are inconsistent with other Node.js callbacks. fs.existsSync() does not use a callback.

if (fs.existsSync('/etc/passwd')) {
  console.log('The path exists.');
}

fs.fchmod(fd, mode, callback)#

• fd <integer>
• mode <string> | <integer>
• callback <Function>
  • err <Error>

Asynchronous fchmod(2). No arguments other than a possible exception are given to the completion callback.

fs.fchmodSync(fd, mode)#

• fd <integer>
• mode <string> | <integer>

Synchronous fchmod(2). Returns undefined.

fs.fchown(fd, uid, gid, callback)#

• fd <integer>
• uid <integer>
• gid <integer>
• callback <Function>
  • err <Error>

Asynchronous fchown(2). No arguments other than a possible exception are given to the completion callback.

fs.fchownSync(fd, uid, gid)#

• fd <integer>
• uid <integer>
• gid <integer>

Synchronous fchown(2). Returns undefined.

fs.fdatasync(fd, callback)#

• fd <integer>
• callback <Function>
  • err <Error>

Asynchronous fdatasync(2). No arguments other than a possible exception are given to the completion callback.

fs.fdatasyncSync(fd)#

• fd <integer>

Synchronous fdatasync(2). Returns undefined.

fs.fstat(fd[, options], callback)#

• fd <integer>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned fs.Stats object should be bigint. Default: false.
• callback <Function>
  • err <Error>
  • stats <fs.Stats>

Asynchronous fstat(2). The callback gets two arguments (err, stats) where stats is an fs.Stats object. fstat() is identical to stat(), except that the file to be stat-ed is specified by the file descriptor fd.

fs.fstatSync(fd[, options])#

• fd <integer>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned fs.Stats object should be bigint. Default: false.
• Returns: <fs.Stats>

Synchronous fstat(2).

fs.fsync(fd, callback)#

• fd <integer>
• callback <Function>
  • err <Error>

Asynchronous fsync(2). No arguments other than a possible exception are given to the completion callback.

fs.fsyncSync(fd)#

• fd <integer>

Synchronous fsync(2). Returns undefined.

fs.ftruncate(fd[, len], callback)#

• fd <integer>
• len <integer> Default: 0
• callback <Function>
  • err <Error>

Asynchronous ftruncate(2). No arguments other than a possible exception are given to the completion callback.

If the file referred to by the file descriptor was larger than len bytes, only the first len bytes will be retained in the file.

For example, the following program retains only the first four bytes of the file:

console.log(fs.readFileSync('temp.txt', 'utf8'));
// Prints: Node.js

// get the file descriptor of the file to be truncated
const fd = fs.openSync('temp.txt', 'r+');

// Truncate the file to first four bytes
fs.ftruncate(fd, 4, (err) => {
  assert.ifError(err);
  console.log(fs.readFileSync('temp.txt', 'utf8'));
});
// Prints: Node

If the file previously was shorter than len bytes, it is extended, and the extended part is filled with null bytes ('\0'):

console.log(fs.readFileSync('temp.txt', 'utf8'));
// Prints: Node.js

// get the file descriptor of the file to be truncated
const fd = fs.openSync('temp.txt', 'r+');

// Truncate the file to 10 bytes, whereas the actual size is 7 bytes
fs.ftruncate(fd, 10, (err) => {
  assert.ifError(err);
  console.log(fs.readFileSync('temp.txt'));
});
// Prints: <Buffer 4e 6f 64 65 2e 6a 73 00 00 00>
// ('Node.js\0\0\0' in UTF8)

The last three bytes are null bytes ('\0'), to compensate the over-truncation.

fs.ftruncateSync(fd[, len])#

• fd <integer>
• len <integer> Default: 0

Returns undefined.

For detailed information, see the documentation of the asynchronous version of this API: fs.ftruncate().

fs.futimes(fd, atime, mtime, callback)#

• fd <integer>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• callback <Function>
  • err <Error>

Change the file system timestamps of the object referenced by the supplied file descriptor. See fs.utimes().

This function does not work on AIX versions before 7.1, it will return the error UV_ENOSYS.

fs.futimesSync(fd, atime, mtime)#

• fd <integer>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>

Synchronous version of fs.futimes(). Returns undefined.

fs.lchmod(path, mode, callback)#

• path <string> | <Buffer> | <URL>
• mode <integer>
• callback <Function>
  • err <Error>

Asynchronous lchmod(2). No arguments other than a possible exception are given to the completion callback.

Only available on macOS.

fs.lchmodSync(path, mode)#

• path <string> | <Buffer> | <URL>
• mode <integer>

Synchronous lchmod(2). Returns undefined.

fs.lchown(path, uid, gid, callback)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>
• callback <Function>
  • err <Error>

Asynchronous lchown(2). No arguments other than a possible exception are given to the completion callback.

fs.lchownSync(path, uid, gid)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>

Synchronous lchown(2). Returns undefined.

fs.lutimes(path, atime, mtime, callback)#

• path <string> | <Buffer> | <URL>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• callback <Function>
  • err <Error>

Changes the access and modification times of a file in the same way as fs.utimes(), with the difference that if the path refers to a symbolic link, then the link is not dereferenced: instead, the timestamps of the symbolic link itself are changed.

No arguments other than a possible exception are given to the completion callback.

fs.lutimesSync(path, atime, mtime)#

• path <string> | <Buffer> | <URL>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>

Change the file system timestamps of the symbolic link referenced by path. Returns undefined, or throws an exception when parameters are incorrect or the operation fails. This is the synchronous version of fs.lutimes().

fs.link(existingPath, newPath, callback)#

• existingPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>
• callback <Function>
  • err <Error>

Asynchronous link(2). No arguments other than a possible exception are given to the completion callback.

fs.linkSync(existingPath, newPath)#

• existingPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>

Synchronous link(2). Returns undefined.

fs.lstat(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned fs.Stats object should be bigint. Default: false.
• callback <Function>
  • err <Error>
  • stats <fs.Stats>

Asynchronous lstat(2). The callback gets two arguments (err, stats) where stats is a fs.Stats object. lstat() is identical to stat(), except that if path is a symbolic link, then the link itself is stat-ed, not the file that it refers to.

fs.lstatSync(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned fs.Stats object should be bigint. Default: false.
• Returns: <fs.Stats>

Synchronous lstat(2).

fs.mkdir(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object> | <integer>
  • recursive <boolean> Default: false
  • mode <string> | <integer> Not supported on Windows. Default: 0o777.
• callback <Function>
  • err <Error>

Asynchronously creates a directory.

The callback is given a possible exception and, if recursive is true, the first directory path created, (err, [path]).

The optional options argument can be an integer specifying mode (permission and sticky bits), or an object with a mode property and a recursive property indicating whether parent directories should be created. Calling fs.mkdir() when path is a directory that exists results in an error only when recursive is false.

// Creates /tmp/a/apple, regardless of whether `/tmp` and /tmp/a exist.
fs.mkdir('/tmp/a/apple', { recursive: true }, (err) => {
  if (err) throw err;
});

On Windows, using fs.mkdir() on the root directory even with recursion will result in an error:

fs.mkdir('/', { recursive: true }, (err) => {
  // => [Error: EPERM: operation not permitted, mkdir 'C:\']
});

See also: mkdir(2).

fs.mkdirSync(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object> | <integer>
  • recursive <boolean> Default: false
  • mode <string> | <integer> Not supported on Windows. Default: 0o777.
• Returns: <string> | <undefined>

Synchronously creates a directory. Returns undefined, or if recursive is true, the first directory path created. This is the synchronous version of fs.mkdir().

See also: mkdir(2).

fs.mkdtemp(prefix[, options], callback)#

• prefix <string>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• callback <Function>
  • err <Error>
  • directory <string>

Creates a unique temporary directory.

Generates six random characters to be appended behind a required prefix to create a unique temporary directory. Due to platform inconsistencies, avoid trailing X characters in prefix. Some platforms, notably the BSDs, can return more than six random characters, and replace trailing X characters in prefix with random characters.

The created directory path is passed as a string to the callback's second parameter.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use.

fs.mkdtemp(path.join(os.tmpdir(), 'foo-'), (err, directory) => {
  if (err) throw err;
  console.log(directory);
  // Prints: /tmp/foo-itXde2 or C:\Users\...\AppData\Local\Temp\foo-itXde2
});

The fs.mkdtemp() method will append the six randomly selected characters directly to the prefix string. For instance, given a directory /tmp, if the intention is to create a temporary directory within /tmp, the prefix must end with a trailing platform-specific path separator (require('path').sep).

// The parent directory for the new temporary directory
const tmpDir = os.tmpdir();

// This method is *INCORRECT*:
fs.mkdtemp(tmpDir, (err, directory) => {
  if (err) throw err;
  console.log(directory);
  // Will print something similar to `/tmpabc123`.
  // A new temporary directory is created at the file system root
  // rather than *within* the /tmp directory.
});

// This method is *CORRECT*:
const { sep } = require('path');
fs.mkdtemp(`${tmpDir}${sep}`, (err, directory) => {
  if (err) throw err;
  console.log(directory);
  // Will print something similar to `/tmp/abc123`.
  // A new temporary directory is created within
  // the /tmp directory.
});

fs.mkdtempSync(prefix[, options])#

• prefix <string>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <string>

Returns the created directory path.

For detailed information, see the documentation of the asynchronous version of this API: fs.mkdtemp().

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use.

fs.open(path[, flags[, mode]], callback)#

• path <string> | <Buffer> | <URL>
• flags <string> | <number> See support of file system flags. Default: 'r'.
• mode <string> | <integer> Default: 0o666 (readable and writable)
• callback <Function>
  • err <Error>
  • fd <integer>

Asynchronous file open. See open(2).

mode sets the file mode (permission and sticky bits), but only if the file was created. On Windows, only the write permission can be manipulated; see fs.chmod().

The callback gets two arguments (err, fd).

Some characters (< > : " / \ | ? *) are reserved under Windows as documented by Naming Files, Paths, and Namespaces. Under NTFS, if the filename contains a colon, Node.js will open a file system stream, as described by this MSDN page.

Functions based on fs.open() exhibit this behavior as well: fs.writeFile(), fs.readFile(), etc.

fs.opendir(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • encoding <string> | <null> Default: 'utf8'
  • bufferSize <number> Number of directory entries that are buffered internally when reading from the directory. Higher values lead to better performance but higher memory usage. Default: 32
• callback <Function>
  • err <Error>
  • dir <fs.Dir>

Asynchronously open a directory. See opendir(3).

Creates an fs.Dir, which contains all further functions for reading from and cleaning up the directory.

The encoding option sets the encoding for the path while opening the directory and subsequent read operations.

fs.opendirSync(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • encoding <string> | <null> Default: 'utf8'
  • bufferSize <number> Number of directory entries that are buffered internally when reading from the directory. Higher values lead to better performance but higher memory usage. Default: 32
• Returns: <fs.Dir>

Synchronously open a directory. See opendir(3).

Creates an fs.Dir, which contains all further functions for reading from and cleaning up the directory.

The encoding option sets the encoding for the path while opening the directory and subsequent read operations.

fs.openSync(path[, flags, mode])#

• path <string> | <Buffer> | <URL>
• flags <string> | <number> Default: 'r'. See support of file system flags.
• mode <string> | <integer> Default: 0o666
• Returns: <number>

Returns an integer representing the file descriptor.

For detailed information, see the documentation of the asynchronous version of this API: fs.open().

fs.read(fd, buffer, offset, length, position, callback)#

• fd <integer>
• buffer <Buffer> | <TypedArray> | <DataView>
• offset <integer>
• length <integer>
• position <integer>
• callback <Function>
  • err <Error>
  • bytesRead <integer>
  • buffer <Buffer>

Read data from the file specified by fd.

buffer is the buffer that the data (read from the fd) will be written to.

offset is the offset in the buffer to start writing at.

length is an integer specifying the number of bytes to read.

position is an argument specifying where to begin reading from in the file. If position is null, data will be read from the current file position, and the file position will be updated. If position is an integer, the file position will remain unchanged.

The callback is given the three arguments, (err, bytesRead, buffer).

If the file is not modified concurrently, the end-of-file is reached when the number of bytes read is zero.

If this method is invoked as its util.promisify()ed version, it returns a Promise for an Object with bytesRead and buffer properties.

fs.read(fd, [options,] callback)#

• fd <integer>
• options <Object>
  • buffer <Buffer> | <TypedArray> | <DataView> Default: Buffer.alloc(16384)
  • offset <integer> Default: 0
  • length <integer> Default: buffer.length
  • position <integer> Default: null
• callback <Function>
  • err <Error>
  • bytesRead <integer>
  • buffer <Buffer>

Similar to the above fs.read function, this version takes an optional options object. If no options object is specified, it will default with the above values.

fs.readdir(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
  • withFileTypes <boolean> Default: false
• callback <Function>
  • err <Error>
  • files <string[]> | <Buffer[]> | <fs.Dirent[]>

Asynchronous readdir(3). Reads the contents of a directory. The callback gets two arguments (err, files) where files is an array of the names of the files in the directory excluding '.' and '..'.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the filenames passed to the callback. If the encoding is set to 'buffer', the filenames returned will be passed as Buffer objects.

If options.withFileTypes is set to true, the files array will contain fs.Dirent objects.

fs.readdirSync(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
  • withFileTypes <boolean> Default: false
• Returns: <string[]> | <Buffer[]> | <fs.Dirent[]>

Synchronous readdir(3).

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the filenames returned. If the encoding is set to 'buffer', the filenames returned will be passed as Buffer objects.

If options.withFileTypes is set to true, the result will contain fs.Dirent objects.

fs.readFile(path[, options], callback)#

• path <string> | <Buffer> | <URL> | <integer> filename or file descriptor
• options <Object> | <string>
  • encoding <string> | <null> Default: null
  • flag <string> See support of file system flags. Default: 'r'.
• callback <Function>
  • err <Error>
  • data <string> | <Buffer>

Asynchronously reads the entire contents of a file.

fs.readFile('/etc/passwd', (err, data) => {
  if (err) throw err;
  console.log(data);
});

The callback is passed two arguments (err, data), where data is the contents of the file.

If no encoding is specified, then the raw buffer is returned.

If options is a string, then it specifies the encoding:

fs.readFile('/etc/passwd', 'utf8', callback);

When the path is a directory, the behavior of fs.readFile() and fs.readFileSync() is platform-specific. On macOS, Linux, and Windows, an error will be returned. On FreeBSD, a representation of the directory's contents will be returned.

// macOS, Linux, and Windows
fs.readFile('<directory>', (err, data) => {
  // => [Error: EISDIR: illegal operation on a directory, read <directory>]
});

//  FreeBSD
fs.readFile('<directory>', (err, data) => {
  // => null, <data>
});

The fs.readFile() function buffers the entire file. To minimize memory costs, when possible prefer streaming via fs.createReadStream().

File descriptors#

1. Any specified file descriptor has to support reading.
2. If a file descriptor is specified as the path, it will not be closed automatically.
3. The reading will begin at the current position. For example, if the file already had 'Hello World' and six bytes are read with the file descriptor, the call to fs.readFile() with the same file descriptor, would give 'World', rather than 'Hello World'.

fs.readFileSync(path[, options])#

• path <string> | <Buffer> | <URL> | <integer> filename or file descriptor
• options <Object> | <string>
  • encoding <string> | <null> Default: null
  • flag <string> See support of file system flags. Default: 'r'.
• Returns: <string> | <Buffer>

Returns the contents of the path.

For detailed information, see the documentation of the asynchronous version of this API: fs.readFile().

If the encoding option is specified then this function returns a string. Otherwise it returns a buffer.

Similar to fs.readFile(), when the path is a directory, the behavior of fs.readFileSync() is platform-specific.

// macOS, Linux, and Windows
fs.readFileSync('<directory>');
// => [Error: EISDIR: illegal operation on a directory, read <directory>]

//  FreeBSD
fs.readFileSync('<directory>'); // => <data>

fs.readlink(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• callback <Function>
  • err <Error>
  • linkString <string> | <Buffer>

Asynchronous readlink(2). The callback gets two arguments (err, linkString).

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the link path passed to the callback. If the encoding is set to 'buffer', the link path returned will be passed as a Buffer object.

fs.readlinkSync(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <string> | <Buffer>

Synchronous readlink(2). Returns the symbolic link's string value.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the link path returned. If the encoding is set to 'buffer', the link path returned will be passed as a Buffer object.

fs.readSync(fd, buffer, offset, length, position)#

• fd <integer>
• buffer <Buffer> | <TypedArray> | <DataView>
• offset <integer>
• length <integer>
• position <integer>
• Returns: <number>

Returns the number of bytesRead.

For detailed information, see the documentation of the asynchronous version of this API: fs.read().

fs.readSync(fd, buffer, [options])#

• fd <integer>
• buffer <Buffer> | <TypedArray> | <DataView>
• options <Object>
  • offset <integer> Default: 0
  • length <integer> Default: buffer.length
  • position <integer> Default: null
• Returns: <number>

Returns the number of bytesRead.

Similar to the above fs.readSync function, this version takes an optional options object. If no options object is specified, it will default with the above values.

For detailed information, see the documentation of the asynchronous version of this API: fs.read().

fs.readv(fd, buffers[, position], callback)#

• fd <integer>
• buffers <ArrayBufferView[]>
• position <integer>
• callback <Function>
  • err <Error>
  • bytesRead <integer>
  • buffers <ArrayBufferView[]>

Read from a file specified by fd and write to an array of ArrayBufferViews using readv().

position is the offset from the beginning of the file from where data should be read. If typeof position !== 'number', the data will be read from the current position.

The callback will be given three arguments: err, bytesRead, and buffers. bytesRead is how many bytes were read from the file.

If this method is invoked as its util.promisify()ed version, it returns a Promise for an Object with bytesRead and buffers properties.

fs.readvSync(fd, buffers[, position])#

• fd <integer>
• buffers <ArrayBufferView[]>
• position <integer>
• Returns: <number> The number of bytes read.

For detailed information, see the documentation of the asynchronous version of this API: fs.readv().

fs.realpath(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• callback <Function>
  • err <Error>
  • resolvedPath <string> | <Buffer>

Asynchronously computes the canonical pathname by resolving ., .. and symbolic links.

A canonical pathname is not necessarily unique. Hard links and bind mounts can expose a file system entity through many pathnames.

This function behaves like realpath(3), with some exceptions:

1. No case conversion is performed on case-insensitive file systems.

2. The maximum number of symbolic links is platform-independent and generally (much) higher than what the native realpath(3) implementation supports.

The callback gets two arguments (err, resolvedPath). May use process.cwd to resolve relative paths.

Only paths that can be converted to UTF8 strings are supported.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the path passed to the callback. If the encoding is set to 'buffer', the path returned will be passed as a Buffer object.

If path resolves to a socket or a pipe, the function will return a system dependent name for that object.

fs.realpath.native(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• callback <Function>
  • err <Error>
  • resolvedPath <string> | <Buffer>

Asynchronous realpath(3).

The callback gets two arguments (err, resolvedPath).

Only paths that can be converted to UTF8 strings are supported.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the path passed to the callback. If the encoding is set to 'buffer', the path returned will be passed as a Buffer object.

On Linux, when Node.js is linked against musl libc, the procfs file system must be mounted on /proc in order for this function to work. Glibc does not have this restriction.

fs.realpathSync(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <string> | <Buffer>

Returns the resolved pathname.

For detailed information, see the documentation of the asynchronous version of this API: fs.realpath().

fs.realpathSync.native(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <string> | <Buffer>

Synchronous realpath(3).

Only paths that can be converted to UTF8 strings are supported.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the path returned. If the encoding is set to 'buffer', the path returned will be passed as a Buffer object.

On Linux, when Node.js is linked against musl libc, the procfs file system must be mounted on /proc in order for this function to work. Glibc does not have this restriction.

fs.rename(oldPath, newPath, callback)#

• oldPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>
• callback <Function>
  • err <Error>

Asynchronously rename file at oldPath to the pathname provided as newPath. In the case that newPath already exists, it will be overwritten. If there is a directory at newPath, an error will be raised instead. No arguments other than a possible exception are given to the completion callback.

See also: rename(2).

fs.rename('oldFile.txt', 'newFile.txt', (err) => {
  if (err) throw err;
  console.log('Rename complete!');
});

fs.renameSync(oldPath, newPath)#

• oldPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>

Synchronous rename(2). Returns undefined.

fs.rmdir(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js retries the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive directory removal. In recursive mode, errors are not reported if path does not exist, and operations are retried on failure. Default: false.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.
• callback <Function>
  • err <Error>

Asynchronous rmdir(2). No arguments other than a possible exception are given to the completion callback.

Using fs.rmdir() on a file (not a directory) results in an ENOENT error on Windows and an ENOTDIR error on POSIX.

Setting recursive to true results in behavior similar to the Unix command rm -rf: an error will not be raised for paths that do not exist, and paths that represent files will be deleted. The permissive behavior of the recursive option is deprecated, ENOTDIR and ENOENT will be thrown in the future.

fs.rmdirSync(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js retries the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive directory removal. In recursive mode, errors are not reported if path does not exist, and operations are retried on failure. Default: false.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.

Synchronous rmdir(2). Returns undefined.

Using fs.rmdirSync() on a file (not a directory) results in an ENOENT error on Windows and an ENOTDIR error on POSIX.

Setting recursive to true results in behavior similar to the Unix command rm -rf: an error will not be raised for paths that do not exist, and paths that represent files will be deleted. The permissive behavior of the recursive option is deprecated, ENOTDIR and ENOENT will be thrown in the future.

fs.rm(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • force <boolean> When true, exceptions will be ignored if path does not exist. Default: false.
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js will retry the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive removal. In recursive mode operations are retried on failure. Default: false.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.
• callback <Function>
  • err <Error>

Asynchronously removes files and directories (modeled on the standard POSIX rm utility). No arguments other than a possible exception are given to the completion callback.

fs.rmSync(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • force <boolean> When true, exceptions will be ignored if path does not exist. Default: false.
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js will retry the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive directory removal. In recursive mode operations are retried on failure. Default: false.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.

Synchronously removes files and directories (modeled on the standard POSIX rm utility). Returns undefined.

fs.stat(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned fs.Stats object should be bigint. Default: false.
• callback <Function>
  • err <Error>
  • stats <fs.Stats>

Asynchronous stat(2). The callback gets two arguments (err, stats) where stats is an fs.Stats object.

In case of an error, the err.code will be one of Common System Errors.

Using fs.stat() to check for the existence of a file before calling fs.open(), fs.readFile() or fs.writeFile() is not recommended. Instead, user code should open/read/write the file directly and handle the error raised if the file is not available.

To check if a file exists without manipulating it afterwards, fs.access() is recommended.

For example, given the following directory structure:

- txtDir
-- file.txt
- app.js

The next program will check for the stats of the given paths:

const fs = require('fs');

const pathsToCheck = ['./txtDir', './txtDir/file.txt'];

for (let i = 0; i < pathsToCheck.length; i++) {
  fs.stat(pathsToCheck[i], function(err, stats) {
    console.log(stats.isDirectory());
    console.log(stats);
  });
}

The resulting output will resemble:

true
Stats {
  dev: 16777220,
  mode: 16877,
  nlink: 3,
  uid: 501,
  gid: 20,
  rdev: 0,
  blksize: 4096,
  ino: 14214262,
  size: 96,
  blocks: 0,
  atimeMs: 1561174653071.963,
  mtimeMs: 1561174614583.3518,
  ctimeMs: 1561174626623.5366,
  birthtimeMs: 1561174126937.2893,
  atime: 2019-06-22T03:37:33.072Z,
  mtime: 2019-06-22T03:36:54.583Z,
  ctime: 2019-06-22T03:37:06.624Z,
  birthtime: 2019-06-22T03:28:46.937Z
}
false
Stats {
  dev: 16777220,
  mode: 33188,
  nlink: 1,
  uid: 501,
  gid: 20,
  rdev: 0,
  blksize: 4096,
  ino: 14214074,
  size: 8,
  blocks: 8,
  atimeMs: 1561174616618.8555,
  mtimeMs: 1561174614584,
  ctimeMs: 1561174614583.8145,
  birthtimeMs: 1561174007710.7478,
  atime: 2019-06-22T03:36:56.619Z,
  mtime: 2019-06-22T03:36:54.584Z,
  ctime: 2019-06-22T03:36:54.584Z,
  birthtime: 2019-06-22T03:26:47.711Z
}

fs.statSync(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned fs.Stats object should be bigint. Default: false.
• Returns: <fs.Stats>

Synchronous stat(2).

fs.symlink(target, path[, type], callback)#

• target <string> | <Buffer> | <URL>
• path <string> | <Buffer> | <URL>
• type <string>
• callback <Function>
  • err <Error>

Asynchronous symlink(2) which creates the link called path pointing to target. No arguments other than a possible exception are given to the completion callback.

The type argument is only available on Windows and ignored on other platforms. It can be set to 'dir', 'file', or 'junction'. If the type argument is not set, Node.js will autodetect target type and use 'file' or 'dir'. If the target does not exist, 'file' will be used. Windows junction points require the destination path to be absolute. When using 'junction', the target argument will automatically be normalized to absolute path.

Relative targets are relative to the link’s parent directory.

fs.symlink('./mew', './example/mewtwo', callback);

The above example creates a symbolic link mewtwo in the example which points to mew in the same directory:

$ tree example/
example/
├── mew
└── mewtwo -> ./mew

fs.symlinkSync(target, path[, type])#

• target <string> | <Buffer> | <URL>
• path <string> | <Buffer> | <URL>
• type <string>

Returns undefined.

For detailed information, see the documentation of the asynchronous version of this API: fs.symlink().

fs.truncate(path[, len], callback)#

• path <string> | <Buffer> | <URL>
• len <integer> Default: 0
• callback <Function>
  • err <Error>

Asynchronous truncate(2). No arguments other than a possible exception are given to the completion callback. A file descriptor can also be passed as the first argument. In this case, fs.ftruncate() is called.

Passing a file descriptor is deprecated and may result in an error being thrown in the future.

fs.truncateSync(path[, len])#

• path <string> | <Buffer> | <URL>
• len <integer> Default: 0

Synchronous truncate(2). Returns undefined. A file descriptor can also be passed as the first argument. In this case, fs.ftruncateSync() is called.

Passing a file descriptor is deprecated and may result in an error being thrown in the future.

fs.unlink(path, callback)#

• path <string> | <Buffer> | <URL>
• callback <Function>
  • err <Error>

Asynchronously removes a file or symbolic link. No arguments other than a possible exception are given to the completion callback.

// Assuming that 'path/file.txt' is a regular file.
fs.unlink('path/file.txt', (err) => {
  if (err) throw err;
  console.log('path/file.txt was deleted');
});

fs.unlink() will not work on a directory, empty or otherwise. To remove a directory, use fs.rmdir().

See also: unlink(2).

fs.unlinkSync(path)#

• path <string> | <Buffer> | <URL>

Synchronous unlink(2). Returns undefined.

fs.unwatchFile(filename[, listener])#

• filename <string> | <Buffer> | <URL>
• listener <Function> Optional, a listener previously attached using fs.watchFile()

Stop watching for changes on filename. If listener is specified, only that particular listener is removed. Otherwise, all listeners are removed, effectively stopping watching of filename.

Calling fs.unwatchFile() with a filename that is not being watched is a no-op, not an error.

Using fs.watch() is more efficient than fs.watchFile() and fs.unwatchFile(). fs.watch() should be used instead of fs.watchFile() and fs.unwatchFile() when possible.

fs.utimes(path, atime, mtime, callback)#

• path <string> | <Buffer> | <URL>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• callback <Function>
  • err <Error>

Change the file system timestamps of the object referenced by path.

The atime and mtime arguments follow these rules:

• Values can be either numbers representing Unix epoch time in seconds, Dates, or a numeric string like '123456789.0'.
• If the value can not be converted to a number, or is NaN, Infinity or -Infinity, an Error will be thrown.

fs.utimesSync(path, atime, mtime)#

• path <string> | <Buffer> | <URL>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>

Returns undefined.

For detailed information, see the documentation of the asynchronous version of this API: fs.utimes().

fs.watch(filename[, options][, listener])#

• filename <string> | <Buffer> | <URL>
• options <string> | <Object>
  • persistent <boolean> Indicates whether the process should continue to run as long as files are being watched. Default: true.
  • recursive <boolean> Indicates whether all subdirectories should be watched, or only the current directory. This applies when a directory is specified, and only on supported platforms (See Caveats). Default: false.
  • encoding <string> Specifies the character encoding to be used for the filename passed to the listener. Default: 'utf8'.
• listener <Function> | <undefined> Default: undefined
  • eventType <string>
  • filename <string> | <Buffer>
• Returns: <fs.FSWatcher>

Watch for changes on filename, where filename is either a file or a directory.

The second argument is optional. If options is provided as a string, it specifies the encoding. Otherwise options should be passed as an object.

The listener callback gets two arguments (eventType, filename). eventType is either 'rename' or 'change', and filename is the name of the file which triggered the event.

On most platforms, 'rename' is emitted whenever a filename appears or disappears in the directory.

The listener callback is attached to the 'change' event fired by fs.FSWatcher, but it is not the same thing as the 'change' value of eventType.

Caveats#

The fs.watch API is not 100% consistent across platforms, and is unavailable in some situations.

The recursive option is only supported on macOS and Windows. An ERR_FEATURE_UNAVAILABLE_ON_PLATFORM exception will be thrown when the option is used on a platform that does not support it.

On Windows, no events will be emitted if the watched directory is moved or renamed. An EPERM error is reported when the watched directory is deleted.

Availability#

This feature depends on the underlying operating system providing a way to be notified of filesystem changes.

• On Linux systems, this uses inotify(7).
• On BSD systems, this uses kqueue(2).
• On macOS, this uses kqueue(2) for files and FSEvents for directories.
• On SunOS systems (including Solaris and SmartOS), this uses event ports.
• On Windows systems, this feature depends on ReadDirectoryChangesW.
• On Aix systems, this feature depends on AHAFS, which must be enabled.
• On IBM i systems, this feature is not supported.

If the underlying functionality is not available for some reason, then fs.watch() will not be able to function and may thrown an exception. For example, watching files or directories can be unreliable, and in some cases impossible, on network file systems (NFS, SMB, etc) or host file systems when using virtualization software such as Vagrant or Docker.

It is still possible to use fs.watchFile(), which uses stat polling, but this method is slower and less reliable.

Inodes#

On Linux and macOS systems, fs.watch() resolves the path to an inode and watches the inode. If the watched path is deleted and recreated, it is assigned a new inode. The watch will emit an event for the delete but will continue watching the original inode. Events for the new inode will not be emitted. This is expected behavior.

AIX files retain the same inode for the lifetime of a file. Saving and closing a watched file on AIX will result in two notifications (one for adding new content, and one for truncation).

Filename argument#

Providing filename argument in the callback is only supported on Linux, macOS, Windows, and AIX. Even on supported platforms, filename is not always guaranteed to be provided. Therefore, don't assume that filename argument is always provided in the callback, and have some fallback logic if it is null.

fs.watch('somedir', (eventType, filename) => {
  console.log(`event type is: ${eventType}`);
  if (filename) {
    console.log(`filename provided: ${filename}`);
  } else {
    console.log('filename not provided');
  }
});

fs.watchFile(filename[, options], listener)#

• filename <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Default: false
  • persistent <boolean> Default: true
  • interval <integer> Default: 5007
• listener <Function>
  • current <fs.Stats>
  • previous <fs.Stats>
• Returns: <fs.StatWatcher>

Watch for changes on filename. The callback listener will be called each time the file is accessed.

The options argument may be omitted. If provided, it should be an object. The options object may contain a boolean named persistent that indicates whether the process should continue to run as long as files are being watched. The options object may specify an interval property indicating how often the target should be polled in milliseconds.

The listener gets two arguments the current stat object and the previous stat object:

fs.watchFile('message.text', (curr, prev) => {
  console.log(`the current mtime is: ${curr.mtime}`);
  console.log(`the previous mtime was: ${prev.mtime}`);
});

These stat objects are instances of fs.Stat. If the bigint option is true, the numeric values in these objects are specified as BigInts.

To be notified when the file was modified, not just accessed, it is necessary to compare curr.mtime and prev.mtime.

When an fs.watchFile operation results in an ENOENT error, it will invoke the listener once, with all the fields zeroed (or, for dates, the Unix Epoch). If the file is created later on, the listener will be called again, with the latest stat objects. This is a change in functionality since v0.10.

Using fs.watch() is more efficient than fs.watchFile and fs.unwatchFile. fs.watch should be used instead of fs.watchFile and fs.unwatchFile when possible.

When a file being watched by fs.watchFile() disappears and reappears, then the contents of previous in the second callback event (the file's reappearance) will be the same as the contents of previous in the first callback event (its disappearance).

This happens when:

• the file is deleted, followed by a restore
• the file is renamed and then renamed a second time back to its original name

fs.write(fd, buffer[, offset[, length[, position]]], callback)#

• fd <integer>
• buffer <Buffer> | <TypedArray> | <DataView> | <string> | <Object>
• offset <integer>
• length <integer>
• position <integer>
• callback <Function>
  • err <Error>
  • bytesWritten <integer>
  • buffer <Buffer> | <TypedArray> | <DataView>

Write buffer to the file specified by fd. If buffer is a normal object, it must have an own toString function property.

offset determines the part of the buffer to be written, and length is an integer specifying the number of bytes to write.

position refers to the offset from the beginning of the file where this data should be written. If typeof position !== 'number', the data will be written at the current position. See pwrite(2).

The callback will be given three arguments (err, bytesWritten, buffer) where bytesWritten specifies how many bytes were written from buffer.

If this method is invoked as its util.promisify()ed version, it returns a Promise for an Object with bytesWritten and buffer properties.

It is unsafe to use fs.write() multiple times on the same file without waiting for the callback. For this scenario, fs.createWriteStream() is recommended.

On Linux, positional writes don't work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

fs.write(fd, string[, position[, encoding]], callback)#

• fd <integer>
• string <string> | <Object>
• position <integer>
• encoding <string> Default: 'utf8'
• callback <Function>
  • err <Error>
  • written <integer>
  • string <string>

Write string to the file specified by fd. If string is not a string, or an object with an own toString function property, then an exception is thrown.

position refers to the offset from the beginning of the file where this data should be written. If typeof position !== 'number' the data will be written at the current position. See pwrite(2).

encoding is the expected string encoding.

The callback will receive the arguments (err, written, string) where written specifies how many bytes the passed string required to be written. Bytes written is not necessarily the same as string characters written. See Buffer.byteLength.

It is unsafe to use fs.write() multiple times on the same file without waiting for the callback. For this scenario, fs.createWriteStream() is recommended.

On Linux, positional writes don't work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

On Windows, if the file descriptor is connected to the console (e.g. fd == 1 or stdout) a string containing non-ASCII characters will not be rendered properly by default, regardless of the encoding used. It is possible to configure the console to render UTF-8 properly by changing the active codepage with the chcp 65001 command. See the chcp docs for more details.

fs.writeFile(file, data[, options], callback)#

• file <string> | <Buffer> | <URL> | <integer> filename or file descriptor
• data <string> | <Buffer> | <TypedArray> | <DataView> | <Object>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • mode <integer> Default: 0o666
  • flag <string> See support of file system flags. Default: 'w'.
• callback <Function>
  • err <Error>

When file is a filename, asynchronously writes data to the file, replacing the file if it already exists. data can be a string or a buffer.

When file is a file descriptor, the behavior is similar to calling fs.write() directly (which is recommended). See the notes below on using a file descriptor.

The encoding option is ignored if data is a buffer. If data is a normal object, it must have an own toString function property.

const data = new Uint8Array(Buffer.from('Hello Node.js'));
fs.writeFile('message.txt', data, (err) => {
  if (err) throw err;
  console.log('The file has been saved!');
});

If options is a string, then it specifies the encoding:

fs.writeFile('message.txt', 'Hello Node.js', 'utf8', callback);

It is unsafe to use fs.writeFile() multiple times on the same file without waiting for the callback. For this scenario, fs.createWriteStream() is recommended.

Using fs.writeFile() with file descriptors#

When file is a file descriptor, the behavior is almost identical to directly calling fs.write() like:

fs.write(fd, Buffer.from(data, options.encoding), callback);

The difference from directly calling fs.write() is that under some unusual conditions, fs.write() might write only part of the buffer and need to be retried to write the remaining data, whereas fs.writeFile() retries until the data is entirely written (or an error occurs).

The implications of this are a common source of confusion. In the file descriptor case, the file is not replaced! The data is not necessarily written to the beginning of the file, and the file's original data may remain before and/or after the newly written data.

For example, if fs.writeFile() is called twice in a row, first to write the string 'Hello', then to write the string ', World', the file would contain 'Hello, World', and might contain some of the file's original data (depending on the size of the original file, and the position of the file descriptor). If a file name had been used instead of a descriptor, the file would be guaranteed to contain only ', World'.

fs.writeFileSync(file, data[, options])#

• file <string> | <Buffer> | <URL> | <integer> filename or file descriptor
• data <string> | <Buffer> | <TypedArray> | <DataView> | <Object>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • mode <integer> Default: 0o666
  • flag <string> See support of file system flags. Default: 'w'.

Returns undefined.

For detailed information, see the documentation of the asynchronous version of this API: fs.writeFile().

fs.writeSync(fd, buffer[, offset[, length[, position]]])#

• fd <integer>
• buffer <Buffer> | <TypedArray> | <DataView> | <string> | <Object>
• offset <integer>
• length <integer>
• position <integer>
• Returns: <number> The number of bytes written.

For detailed information, see the documentation of the asynchronous version of this API: fs.write(fd, buffer...).

fs.writeSync(fd, string[, position[, encoding]])#

• fd <integer>
• string <string> | <Object>
• position <integer>
• encoding <string>
• Returns: <number> The number of bytes written.

For detailed information, see the documentation of the asynchronous version of this API: fs.write(fd, string...).

fs.writev(fd, buffers[, position], callback)#

• fd <integer>
• buffers <ArrayBufferView[]>
• position <integer>
• callback <Function>
  • err <Error>
  • bytesWritten <integer>
  • buffers <ArrayBufferView[]>

Write an array of ArrayBufferViews to the file specified by fd using writev().

position is the offset from the beginning of the file where this data should be written. If typeof position !== 'number', the data will be written at the current position.

The callback will be given three arguments: err, bytesWritten, and buffers. bytesWritten is how many bytes were written from buffers.

If this method is util.promisify()ed, it returns a Promise for an Object with bytesWritten and buffers properties.

It is unsafe to use fs.writev() multiple times on the same file without waiting for the callback. For this scenario, use fs.createWriteStream().

On Linux, positional writes don't work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

fs.writevSync(fd, buffers[, position])#

• fd <integer>
• buffers <ArrayBufferView[]>
• position <integer>
• Returns: <number> The number of bytes written.

For detailed information, see the documentation of the asynchronous version of this API: fs.writev().

fs Promises API#

The fs.promises API provides an alternative set of asynchronous file system methods that return Promise objects rather than using callbacks. The API is accessible via require('fs').promises or require('fs/promises').

Class: FileHandle#

A FileHandle object is a wrapper for a numeric file descriptor. Instances of FileHandle are distinct from numeric file descriptors in that they provide an object oriented API for working with files.

If a FileHandle is not closed using the filehandle.close() method, it might automatically close the file descriptor and will emit a process warning, thereby helping to prevent memory leaks. Please do not rely on this behavior because it is unreliable and the file may not be closed. Instead, always explicitly close FileHandles. Node.js may change this behavior in the future.

Instances of the FileHandle object are created internally by the fsPromises.open() method.

Unlike the callback-based API (fs.fstat(), fs.fchown(), fs.fchmod(), and so on), a numeric file descriptor is not used by the promise-based API. Instead, the promise-based API uses the FileHandle class in order to help avoid accidental leaking of unclosed file descriptors after a Promise is resolved or rejected.

filehandle.appendFile(data, options)#

• data <string> | <Buffer>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
• Returns: <Promise>

Alias of filehandle.writeFile().

When operating on file handles, the mode cannot be changed from what it was set to with fsPromises.open(). Therefore, this is equivalent to filehandle.writeFile().

filehandle.chmod(mode)#

• mode <integer>
• Returns: <Promise>

Modifies the permissions on the file. The Promise is resolved with no arguments upon success.

filehandle.chown(uid, gid)#

• uid <integer>
• gid <integer>
• Returns: <Promise>

Changes the ownership of the file then resolves the Promise with no arguments upon success.

filehandle.close()#

• Returns: <Promise> A Promise that will be resolved once the underlying file descriptor is closed, or will be rejected if an error occurs while closing.

Closes the file handle after waiting for any pending operation on the handle to complete.

const fsPromises = require('fs').promises;
async function openAndClose() {
  let filehandle;
  try {
    filehandle = await fsPromises.open('thefile.txt', 'r');
  } finally {
    if (filehandle !== undefined)
      await filehandle.close();
  }
}

filehandle.datasync()#

• Returns: <Promise>

Asynchronous fdatasync(2). The Promise is resolved with no arguments upon success.

filehandle.fd#

• <number> The numeric file descriptor managed by the FileHandle object.

filehandle.read(buffer, offset, length, position)#

• buffer <Buffer> | <Uint8Array>
• offset <integer>
• length <integer>
• position <integer>
• Returns: <Promise>

Read data from the file.

buffer is the buffer that the data will be written to.

offset is the offset in the buffer to start writing at.

length is an integer specifying the number of bytes to read.

position is an argument specifying where to begin reading from in the file. If position is null, data will be read from the current file position, and the file position will be updated. If position is an integer, the file position will remain unchanged.

Following successful read, the Promise is resolved with an object with a bytesRead property specifying the number of bytes read, and a buffer property that is a reference to the passed in buffer argument.

If the file is not modified concurrently, the end-of-file is reached when the number of bytes read is zero.

filehandle.read(options)#

• options <Object>
  • buffer <Buffer> | <Uint8Array> Default: Buffer.alloc(16384)
  • offset <integer> Default: 0
  • length <integer> Default: buffer.length
  • position <integer> Default: null
• Returns: <Promise>

filehandle.readFile(options)#

• options <Object> | <string>
  • encoding <string> | <null> Default: null
• Returns: <Promise>

Asynchronously reads the entire contents of a file.

The Promise is resolved with the contents of the file. If no encoding is specified (using options.encoding), the data is returned as a Buffer object. Otherwise, the data will be a string.

If options is a string, then it specifies the encoding.

The FileHandle has to support reading.

If one or more filehandle.read() calls are made on a file handle and then a filehandle.readFile() call is made, the data will be read from the current position till the end of the file. It doesn't always read from the beginning of the file.

filehandle.readv(buffers[, position])#

• buffers <ArrayBufferView[]>
• position <integer>
• Returns: <Promise>

Read from a file and write to an array of ArrayBufferViews

The Promise is resolved with an object containing a bytesRead property identifying the number of bytes read, and a buffers property containing a reference to the buffers input.

position is the offset from the beginning of the file where this data should be read from. If typeof position !== 'number', the data will be read from the current position.

filehandle.stat([options])#

• options <Object>
  • bigint <boolean> Whether the numeric values in the returned fs.Stats object should be bigint. Default: false.
• Returns: <Promise>

Retrieves the fs.Stats for the file.

filehandle.sync()#

• Returns: <Promise>

Asynchronous fsync(2). The Promise is resolved with no arguments upon success.

filehandle.truncate(len)#

• len <integer> Default: 0
• Returns: <Promise>

Truncates the file then resolves the Promise with no arguments upon success.

If the file was larger than len bytes, only the first len bytes will be retained in the file.

For example, the following program retains only the first four bytes of the file:

const fs = require('fs');
const fsPromises = fs.promises;

console.log(fs.readFileSync('temp.txt', 'utf8'));
// Prints: Node.js

async function doTruncate() {
  let filehandle = null;
  try {
    filehandle = await fsPromises.open('temp.txt', 'r+');
    await filehandle.truncate(4);
  } finally {
    if (filehandle) {
      // Close the file if it is opened.
      await filehandle.close();
    }
  }
  console.log(fs.readFileSync('temp.txt', 'utf8'));  // Prints: Node
}

doTruncate().catch(console.error);

If the file previously was shorter than len bytes, it is extended, and the extended part is filled with null bytes ('\0'):

const fs = require('fs');
const fsPromises = fs.promises;

console.log(fs.readFileSync('temp.txt', 'utf8'));
// Prints: Node.js

async function doTruncate() {
  let filehandle = null;
  try {
    filehandle = await fsPromises.open('temp.txt', 'r+');
    await filehandle.truncate(10);
  } finally {
    if (filehandle) {
      // Close the file if it is opened.
      await filehandle.close();
    }
  }
  console.log(fs.readFileSync('temp.txt', 'utf8'));  // Prints Node.js\0\0\0
}

doTruncate().catch(console.error);

The last three bytes are null bytes ('\0'), to compensate the over-truncation.

filehandle.utimes(atime, mtime)#

• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• Returns: <Promise>

Change the file system timestamps of the object referenced by the FileHandle then resolves the Promise with no arguments upon success.

This function does not work on AIX versions before 7.1, it will resolve the Promise with an error using code UV_ENOSYS.

filehandle.write(buffer[, offset[, length[, position]]])#

• buffer <Buffer> | <Uint8Array> | <string> | <Object>
• offset <integer>
• length <integer>
• position <integer>
• Returns: <Promise>

Write buffer to the file.

The Promise is resolved with an object containing a bytesWritten property identifying the number of bytes written, and a buffer property containing a reference to the buffer written.

offset determines the part of the buffer to be written, and length is an integer specifying the number of bytes to write.

position refers to the offset from the beginning of the file where this data should be written. If typeof position !== 'number', the data will be written at the current position. See pwrite(2).

It is unsafe to use filehandle.write() multiple times on the same file without waiting for the Promise to be resolved (or rejected). For this scenario, use fs.createWriteStream().

On Linux, positional writes do not work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

filehandle.write(string[, position[, encoding]])#

• string <string> | <Object>
• position <integer>
• encoding <string> Default: 'utf8'
• Returns: <Promise>

Write string to the file. If string is not a string, or an object with an own toString function property, then an exception is thrown.

The Promise is resolved with an object containing a bytesWritten property identifying the number of bytes written, and a buffer property containing a reference to the string written.

position refers to the offset from the beginning of the file where this data should be written. If the type of position is not a number the data will be written at the current position. See pwrite(2).

encoding is the expected string encoding.

It is unsafe to use filehandle.write() multiple times on the same file without waiting for the Promise to be resolved (or rejected). For this scenario, use fs.createWriteStream().

On Linux, positional writes do not work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

filehandle.writeFile(data, options)#

• data <string> | <Buffer> | <Uint8Array> | <Object>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
• Returns: <Promise>

Asynchronously writes data to a file, replacing the file if it already exists. data can be a string, a buffer, or an object with an own toString function property. The Promise is resolved with no arguments upon success.

The encoding option is ignored if data is a buffer.

If options is a string, then it specifies the encoding.

The FileHandle has to support writing.

It is unsafe to use filehandle.writeFile() multiple times on the same file without waiting for the Promise to be resolved (or rejected).

If one or more filehandle.write() calls are made on a file handle and then a filehandle.writeFile() call is made, the data will be written from the current position till the end of the file. It doesn't always write from the beginning of the file.

filehandle.writev(buffers[, position])#

• buffers <ArrayBufferView[]>
• position <integer>
• Returns: <Promise>

Write an array of ArrayBufferViews to the file.

The Promise is resolved with an object containing a bytesWritten property identifying the number of bytes written, and a buffers property containing a reference to the buffers input.

position is the offset from the beginning of the file where this data should be written. If typeof position !== 'number', the data will be written at the current position.

It is unsafe to call writev() multiple times on the same file without waiting for the previous operation to complete.

On Linux, positional writes don't work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

fsPromises.access(path[, mode])#

• path <string> | <Buffer> | <URL>
• mode <integer> Default: fs.constants.F_OK
• Returns: <Promise>

Tests a user's permissions for the file or directory specified by path. The mode argument is an optional integer that specifies the accessibility checks to be performed. Check File access constants for possible values of mode. It is possible to create a mask consisting of the bitwise OR of two or more values (e.g. fs.constants.W_OK | fs.constants.R_OK).

If the accessibility check is successful, the Promise is resolved with no value. If any of the accessibility checks fail, the Promise is rejected with an Error object. The following example checks if the file /etc/passwd can be read and written by the current process.

const fs = require('fs');
const fsPromises = fs.promises;

fsPromises.access('/etc/passwd', fs.constants.R_OK | fs.constants.W_OK)
  .then(() => console.log('can access'))
  .catch(() => console.error('cannot access'));

Using fsPromises.access() to check for the accessibility of a file before calling fsPromises.open() is not recommended. Doing so introduces a race condition, since other processes may change the file's state between the two calls. Instead, user code should open/read/write the file directly and handle the error raised if the file is not accessible.

fsPromises.appendFile(path, data[, options])#

• path <string> | <Buffer> | <URL> | <FileHandle> filename or FileHandle
• data <string> | <Buffer>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • mode <integer> Default: 0o666
  • flag <string> See support of file system flags. Default: 'a'.
• Returns: <Promise>

Asynchronously append data to a file, creating the file if it does not yet exist. data can be a string or a Buffer. The Promise will be resolved with no arguments upon success.

If options is a string, then it specifies the encoding.

The path may be specified as a FileHandle that has been opened for appending (using fsPromises.open()).

fsPromises.chmod(path, mode)#

• path <string> | <Buffer> | <URL>
• mode <string> | <integer>
• Returns: <Promise>

Changes the permissions of a file then resolves the Promise with no arguments upon succces.

fsPromises.chown(path, uid, gid)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>
• Returns: <Promise>

Changes the ownership of a file then resolves the Promise with no arguments upon success.

fsPromises.copyFile(src, dest[, mode])#

• src <string> | <Buffer> | <URL> source filename to copy
• dest <string> | <Buffer> | <URL> destination filename of the copy operation
• mode <integer> modifiers for copy operation. Default: 0.
• Returns: <Promise>

Asynchronously copies src to dest. By default, dest is overwritten if it already exists. The Promise will be resolved with no arguments upon success.

Node.js makes no guarantees about the atomicity of the copy operation. If an error occurs after the destination file has been opened for writing, Node.js will attempt to remove the destination.

mode is an optional integer that specifies the behavior of the copy operation. It is possible to create a mask consisting of the bitwise OR of two or more values (e.g. fs.constants.COPYFILE_EXCL | fs.constants.COPYFILE_FICLONE).

• fs.constants.COPYFILE_EXCL: The copy operation will fail if dest already exists.
• fs.constants.COPYFILE_FICLONE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then a fallback copy mechanism is used.
• fs.constants.COPYFILE_FICLONE_FORCE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then the operation will fail.

const {
  promises: fsPromises,
  constants: {
    COPYFILE_EXCL
  }
} = require('fs');

// destination.txt will be created or overwritten by default.
fsPromises.copyFile('source.txt', 'destination.txt')
  .then(() => console.log('source.txt was copied to destination.txt'))
  .catch(() => console.log('The file could not be copied'));

// By using COPYFILE_EXCL, the operation will fail if destination.txt exists.
fsPromises.copyFile('source.txt', 'destination.txt', COPYFILE_EXCL)
  .then(() => console.log('source.txt was copied to destination.txt'))
  .catch(() => console.log('The file could not be copied'));

fsPromises.lchmod(path, mode)#

• path <string> | <Buffer> | <URL>
• mode <integer>
• Returns: <Promise>

Changes the permissions on a symbolic link then resolves the Promise with no arguments upon success. This method is only implemented on macOS.

fsPromises.lchown(path, uid, gid)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>
• Returns: <Promise>

Changes the ownership on a symbolic link then resolves the Promise with no arguments upon success.

fsPromises.lutimes(path, atime, mtime)#

• path <string> | <Buffer> | <URL>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• Returns: <Promise>

Changes the access and modification times of a file in the same way as fsPromises.utimes(), with the difference that if the path refers to a symbolic link, then the link is not dereferenced: instead, the timestamps of the symbolic link itself are changed.

Upon success, the Promise is resolved without arguments.

fsPromises.link(existingPath, newPath)#

• existingPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>
• Returns: <Promise>

Asynchronous link(2). The Promise is resolved with no arguments upon success.

fsPromises.lstat(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned fs.Stats object should be bigint. Default: false.
• Returns: <Promise>

Asynchronous lstat(2). The Promise is resolved with the fs.Stats object for the given symbolic link path.

fsPromises.mkdir(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object> | <integer>
  • recursive <boolean> Default: false
  • mode <string> | <integer> Not supported on Windows. Default: 0o777.
• Returns: <Promise>

Asynchronously creates a directory then resolves the Promise with either no arguments, or the first directory path created if recursive is true.

The optional options argument can be an integer specifying mode (permission and sticky bits), or an object with a mode property and a recursive property indicating whether parent directories should be created. Calling fsPromises.mkdir() when path is a directory that exists results in a rejection only when recursive is false.

fsPromises.mkdtemp(prefix[, options])#

• prefix <string>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <Promise>

Creates a unique temporary directory and resolves the Promise with the created directory path. A unique directory name is generated by appending six random characters to the end of the provided prefix. Due to platform inconsistencies, avoid trailing X characters in prefix. Some platforms, notably the BSDs, can return more than six random characters, and replace trailing X characters in prefix with random characters.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use.

fsPromises.mkdtemp(path.join(os.tmpdir(), 'foo-'))
  .catch(console.error);

The fsPromises.mkdtemp() method will append the six randomly selected characters directly to the prefix string. For instance, given a directory /tmp, if the intention is to create a temporary directory within /tmp, the prefix must end with a trailing platform-specific path separator (require('path').sep).

fsPromises.open(path, flags[, mode])#

• path <string> | <Buffer> | <URL>
• flags <string> | <number> See support of file system flags. Default: 'r'.
• mode <string> | <integer> Default: 0o666 (readable and writable)
• Returns: <Promise>

Asynchronous file open that returns a Promise that, when resolved, yields a FileHandle object. See open(2).

mode sets the file mode (permission and sticky bits), but only if the file was created.

Some characters (< > : " / \ | ? *) are reserved under Windows as documented by Naming Files, Paths, and Namespaces. Under NTFS, if the filename contains a colon, Node.js will open a file system stream, as described by this MSDN page.

fsPromises.opendir(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • encoding <string> | <null> Default: 'utf8'
  • bufferSize <number> Number of directory entries that are buffered internally when reading from the directory. Higher values lead to better performance but higher memory usage. Default: 32
• Returns: <Promise> containing <fs.Dir>

Asynchronously open a directory. See opendir(3).

Creates an fs.Dir, which contains all further functions for reading from and cleaning up the directory.

The encoding option sets the encoding for the path while opening the directory and subsequent read operations.

Example using async iteration:

const fs = require('fs');

async function print(path) {
  const dir = await fs.promises.opendir(path);
  for await (const dirent of dir) {
    console.log(dirent.name);
  }
}
print('./').catch(console.error);

fsPromises.readdir(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
  • withFileTypes <boolean> Default: false
• Returns: <Promise>

Reads the contents of a directory then resolves the Promise with an array of the names of the files in the directory excluding '.' and '..'.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the filenames. If the encoding is set to 'buffer', the filenames returned will be passed as Buffer objects.

If options.withFileTypes is set to true, the resolved array will contain fs.Dirent objects.

const fs = require('fs');

async function print(path) {
  const files = await fs.promises.readdir(path);
  for (const file of files) {
    console.log(file);
  }
}
print('./').catch(console.error);

fsPromises.readFile(path[, options])#

• path <string> | <Buffer> | <URL> | <FileHandle> filename or FileHandle
• options <Object> | <string>
  • encoding <string> | <null> Default: null
  • flag <string> See support of file system flags. Default: 'r'.
• Returns: <Promise>

Asynchronously reads the entire contents of a file.

The Promise is resolved with the contents of the file. If no encoding is specified (using options.encoding), the data is returned as a Buffer object. Otherwise, the data will be a string.

If options is a string, then it specifies the encoding.

When the path is a directory, the behavior of fsPromises.readFile() is platform-specific. On macOS, Linux, and Windows, the promise will be rejected with an error. On FreeBSD, a representation of the directory's contents will be returned.

Any specified FileHandle has to support reading.

fsPromises.readlink(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <Promise>

Asynchronous readlink(2). The Promise is resolved with the linkString upon success.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the link path returned. If the encoding is set to 'buffer', the link path returned will be passed as a Buffer object.

fsPromises.realpath(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <Promise>

Determines the actual location of path using the same semantics as the fs.realpath.native() function then resolves the Promise with the resolved path.

Only paths that can be converted to UTF8 strings are supported.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the path. If the encoding is set to 'buffer', the path returned will be passed as a Buffer object.

On Linux, when Node.js is linked against musl libc, the procfs file system must be mounted on /proc in order for this function to work. Glibc does not have this restriction.

fsPromises.rename(oldPath, newPath)#

• oldPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>
• Returns: <Promise>

Renames oldPath to newPath and resolves the Promise with no arguments upon success.

fsPromises.rmdir(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js retries the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive directory removal. In recursive mode, errors are not reported if path does not exist, and operations are retried on failure. Default: false.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.
• Returns: <Promise>

Removes the directory identified by path then resolves the Promise with no arguments upon success.

Using fsPromises.rmdir() on a file (not a directory) results in the Promise being rejected with an ENOENT error on Windows and an ENOTDIR error on POSIX.

Setting recursive to true results in behavior similar to the Unix command rm -rf: an error will not be raised for paths that do not exist, and paths that represent files will be deleted. The permissive behavior of the recursive option is deprecated, ENOTDIR and ENOENT will be thrown in the future.

fsPromises.rm(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • force <boolean> When true, exceptions will be ignored if path does not exist. Default: false.
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js will retry the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive directory removal. In recursive mode operations are retried on failure. Default: false.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.

Removes files and directories (modeled on the standard POSIX rm utility). Resolves the Promise with no arguments on success.

fsPromises.stat(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned fs.Stats object should be bigint. Default: false.
• Returns: <Promise>

The Promise is resolved with the fs.Stats object for the given path.

fsPromises.symlink(target, path[, type])#

• target <string> | <Buffer> | <URL>
• path <string> | <Buffer> | <URL>
• type <string> Default: 'file'
• Returns: <Promise>

Creates a symbolic link then resolves the Promise with no arguments upon success.

The type argument is only used on Windows platforms and can be one of 'dir', 'file', or 'junction'. Windows junction points require the destination path to be absolute. When using 'junction', the target argument will automatically be normalized to absolute path.

fsPromises.truncate(path[, len])#

• path <string> | <Buffer> | <URL>
• len <integer> Default: 0
• Returns: <Promise>

Truncates the path then resolves the Promise with no arguments upon success. The path must be a string or Buffer.

fsPromises.unlink(path)#

• path <string> | <Buffer> | <URL>
• Returns: <Promise>

Asynchronous unlink(2). The Promise is resolved with no arguments upon success.

fsPromises.utimes(path, atime, mtime)#

• path <string> | <Buffer> | <URL>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• Returns: <Promise>

Change the file system timestamps of the object referenced by path then resolves the Promise with no arguments upon success.

The atime and mtime arguments follow these rules:

• Values can be either numbers representing Unix epoch time, Dates, or a numeric string like '123456789.0'.
• If the value can not be converted to a number, or is NaN, Infinity or -Infinity, an Error will be thrown.

fsPromises.writeFile(file, data[, options])#

• file <string> | <Buffer> | <URL> | <FileHandle> filename or FileHandle
• data <string> | <Buffer> | <Uint8Array> | <Object>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • mode <integer> Default: 0o666
  • flag <string> See support of file system flags. Default: 'w'.
• Returns: <Promise>

Asynchronously writes data to a file, replacing the file if it already exists. data can be a string, a buffer, or an object with an own toString function property. The Promise is resolved with no arguments upon success.

The encoding option is ignored if data is a buffer.

If options is a string, then it specifies the encoding.

Any specified FileHandle has to support writing.

It is unsafe to use fsPromises.writeFile() multiple times on the same file without waiting for the Promise to be resolved (or rejected).

FS constants#

The following constants are exported by fs.constants.

Not every constant will be available on every operating system.

To use more than one constant, use the bitwise OR | operator.

Example:

const fs = require('fs');

const {
  O_RDWR,
  O_CREAT,
  O_EXCL
} = fs.constants;

fs.open('/path/to/my/file', O_RDWR | O_CREAT | O_EXCL, (err, fd) => {
  // ...
});

File access constants#

The following constants are meant for use with fs.access().

Constant	Description
F_OK	Flag indicating that the file is visible to the calling process. This is useful for determining if a file exists, but says nothing about rwx permissions. Default if no mode is specified.
R_OK	Flag indicating that the file can be read by the calling process.
W_OK	Flag indicating that the file can be written by the calling process.
X_OK	Flag indicating that the file can be executed by the calling process. This has no effect on Windows (will behave like fs.constants.F_OK).

File copy constants#

The following constants are meant for use with fs.copyFile().

Constant	Description
COPYFILE_EXCL	If present, the copy operation will fail with an error if the destination path already exists.
COPYFILE_FICLONE	If present, the copy operation will attempt to create a copy-on-write reflink. If the underlying platform does not support copy-on-write, then a fallback copy mechanism is used.
COPYFILE_FICLONE_FORCE	If present, the copy operation will attempt to create a copy-on-write reflink. If the underlying platform does not support copy-on-write, then the operation will fail with an error.

File open constants#

The following constants are meant for use with fs.open().

Constant	Description
O_RDONLY	Flag indicating to open a file for read-only access.
O_WRONLY	Flag indicating to open a file for write-only access.
O_RDWR	Flag indicating to open a file for read-write access.
O_CREAT	Flag indicating to create the file if it does not already exist.
O_EXCL	Flag indicating that opening a file should fail if the O_CREAT flag is set and the file already exists.
O_NOCTTY	Flag indicating that if path identifies a terminal device, opening the path shall not cause that terminal to become the controlling terminal for the process (if the process does not already have one).
O_TRUNC	Flag indicating that if the file exists and is a regular file, and the file is opened successfully for write access, its length shall be truncated to zero.
O_APPEND	Flag indicating that data will be appended to the end of the file.
O_DIRECTORY	Flag indicating that the open should fail if the path is not a directory.
O_NOATIME	Flag indicating reading accesses to the file system will no longer result in an update to the atime information associated with the file. This flag is available on Linux operating systems only.
O_NOFOLLOW	Flag indicating that the open should fail if the path is a symbolic link.
O_SYNC	Flag indicating that the file is opened for synchronized I/O with write operations waiting for file integrity.
O_DSYNC	Flag indicating that the file is opened for synchronized I/O with write operations waiting for data integrity.
O_SYMLINK	Flag indicating to open the symbolic link itself rather than the resource it is pointing to.
O_DIRECT	When set, an attempt will be made to minimize caching effects of file I/O.
O_NONBLOCK	Flag indicating to open the file in nonblocking mode when possible.
UV_FS_O_FILEMAP	When set, a memory file mapping is used to access the file. This flag is available on Windows operating systems only. On other operating systems, this flag is ignored.

File type constants#

The following constants are meant for use with the fs.Stats object's mode property for determining a file's type.

Constant	Description
S_IFMT	Bit mask used to extract the file type code.
S_IFREG	File type constant for a regular file.
S_IFDIR	File type constant for a directory.
S_IFCHR	File type constant for a character-oriented device file.
S_IFBLK	File type constant for a block-oriented device file.
S_IFIFO	File type constant for a FIFO/pipe.
S_IFLNK	File type constant for a symbolic link.
S_IFSOCK	File type constant for a socket.

File mode constants#

The following constants are meant for use with the fs.Stats object's mode property for determining the access permissions for a file.

Constant	Description
S_IRWXU	File mode indicating readable, writable, and executable by owner.
S_IRUSR	File mode indicating readable by owner.
S_IWUSR	File mode indicating writable by owner.
S_IXUSR	File mode indicating executable by owner.
S_IRWXG	File mode indicating readable, writable, and executable by group.
S_IRGRP	File mode indicating readable by group.
S_IWGRP	File mode indicating writable by group.
S_IXGRP	File mode indicating executable by group.
S_IRWXO	File mode indicating readable, writable, and executable by others.
S_IROTH	File mode indicating readable by others.
S_IWOTH	File mode indicating writable by others.
S_IXOTH	File mode indicating executable by others.

File system flags#

The following flags are available wherever the flag option takes a string.

• 'a': Open file for appending. The file is created if it does not exist.

• 'ax': Like 'a' but fails if the path exists.

• 'a+': Open file for reading and appending. The file is created if it does not exist.

• 'ax+': Like 'a+' but fails if the path exists.

• 'as': Open file for appending in synchronous mode. The file is created if it does not exist.

• 'as+': Open file for reading and appending in synchronous mode. The file is created if it does not exist.

• 'r': Open file for reading. An exception occurs if the file does not exist.

• 'r+': Open file for reading and writing. An exception occurs if the file does not exist.

• 'rs+': Open file for reading and writing in synchronous mode. Instructs the operating system to bypass the local file system cache.

  This is primarily useful for opening files on NFS mounts as it allows skipping the potentially stale local cache. It has a very real impact on I/O performance so using this flag is not recommended unless it is needed.

  This doesn't turn fs.open() or fsPromises.open() into a synchronous blocking call. If synchronous operation is desired, something like fs.openSync() should be used.

• 'w': Open file for writing. The file is created (if it does not exist) or truncated (if it exists).

• 'wx': Like 'w' but fails if the path exists.

• 'w+': Open file for reading and writing. The file is created (if it does not exist) or truncated (if it exists).

• 'wx+': Like 'w+' but fails if the path exists.

flag can also be a number as documented by open(2); commonly used constants are available from fs.constants. On Windows, flags are translated to their equivalent ones where applicable, e.g. O_WRONLY to FILE_GENERIC_WRITE, or O_EXCL|O_CREAT to CREATE_NEW, as accepted by CreateFileW.

The exclusive flag 'x' (O_EXCL flag in open(2)) causes the operation to return an error if the path already exists. On POSIX, if the path is a symbolic link, using O_EXCL returns an error even if the link is to a path that does not exist. The exclusive flag might not work with network file systems.

On Linux, positional writes don't work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

Modifying a file rather than replacing it may require the flag option to be set to 'r+' rather than the default 'w'.

The behavior of some flags are platform-specific. As such, opening a directory on macOS and Linux with the 'a+' flag, as in the example below, will return an error. In contrast, on Windows and FreeBSD, a file descriptor or a FileHandle will be returned.

// macOS and Linux
fs.open('<directory>', 'a+', (err, fd) => {
  // => [Error: EISDIR: illegal operation on a directory, open <directory>]
});

// Windows and FreeBSD
fs.open('<directory>', 'a+', (err, fd) => {
  // => null, <fd>
});

On Windows, opening an existing hidden file using the 'w' flag (either through fs.open() or fs.writeFile() or fsPromises.open()) will fail with EPERM. Existing hidden files can be opened for writing with the 'r+' flag.

A call to fs.ftruncate() or filehandle.truncate() can be used to reset the file contents.